User`s manual

55
AXIS 282/AXIS 282A - System Options
Resetting to the Factory Default Settings
To reset the AXIS 282/AXIS 282A to the original default settings, go to the System
Options > Maintenance web page (described in Maintenance,
on page 53) or use the
control button on the AXIS 282/AXIS 282A, as described below:
Using the Control Button
Follow the instructions below to reset the AXIS 282/AXIS 282A to the factory default
settings using the Control Button.
1. Switch off the AXIS 282/AXIS
282A by disconnecting power.
2. Press and hold the Control
button while reconnecting the
power.
3. Keep the Control button
pressed until the Status
Indicator displays yellow (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (may take up to 1 minute), the
process is complete and the AXIS 282/AXIS 282A has been reset.
6. Re-install the AXIS 282/AXIS 282A, as described in Installation, on page 10.
Control button
Status Indicator