User`s manual

53
AXIS 282/AXIS 282A - System Options
Bonjour
Your Axis network camera includes support for Bonjour. When enabled, the camera is
automatically detected by operating systems and clients that support this protocol.
Ports & Devices
I/O Ports - the pinout, interface support and the control and monitoring functions
provided by this connector are described in Unit Connectors,
on page 56.
RS-232/RS-485 -
The COM port on the AXIS 282/AXIS 282A, which can be configured as
RS-232 or RS-485, supports several operational modes listed on this page. For more
information, please see the online help.
Maintenance
• Restart - The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
• Restore - The
unit is restarted and most current settings are reset to factory default val-
ues. The settings that will not be reset are as follows:
• the boot protocol (DHCP or static)
•
the static IP address
• the default router
•the subnet mask
• the system time
• Default
- The default button should be used with caution. Pressing this will return all of
the Video Server's settings to the factory default values (including the IP address)
Upgrade Server - See Upgrading t
he Firmware, on page 59.
Backup - To
take a backup of all of the parameters, and any user-defined scripts, click this
button. If necessary, it is then possible to return to a previous configuration if settings are
changed and there is unexpected behavior.
Restore
- click the Browse button to locate the saved backup file (see above) and then click
the Restore button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not
intended for multi-configurations or for firmware upgrades.
Support
The Support Overview page provides valuable information on troubleshooting and contact
information, should you require technical assistance.
The S
ystem Overview gives a quick look over the status of the camera.