User`s manual

49
AXIS 282/AXIS 282A - System Options
Network - Advanced TCP/IP Settings
DNS Configuration
DNS (Domain Name Service) provides the translation of host names to IP addresses on your
network.
Obtain DNS server address via DHCP - au
tomatically use the DNS server settings provided
by the DHCP server. Click the View button to see the current settings.
Use the following DNS server address
- enter the desired DNS server by specifying the
following:
• Domain name - en
ter the domain(s) to search for the host name used by the AXIS
282/AXIS 282A. Multiple domains can be separated by semicolons (;). The host name is
always the first part of a Fully Qualified Domain Name, e.g. myserver is the host name
in the Fully Qualified Domain Name myserver.mycompany.com where mycom-
pany.com is the Domain name.
• Primary
DNS server - Enter the IP address of the primary DNS server. This server pro-
vides the translation of host names
to IP addresses on your network.
• Secondary DNS
server - Specify the IP address of the secondary DNS server. This will
be used if the primary DNS server is unavailable.
NTP Configuration
Obtain NTP server address via DHCP - use a DHCP server to automatically find an NTP
server to synchronize clock of the AXIS 282/AXIS 282A with the other devices on the
network
Use the following NTP server address - use
the host name or IP address of a specific NTP
server for time synchronization.
Host Name Configuration
The AXIS 282/AXIS 282A can be accessed using a host name, instead of an IP address. The
host name is usually the same as the assigned DNS Name.
For more information, please see the online help
Link-Local Address
This is enabled by default and assigns the AXIS 282/AXIS 282A an additional IP address
for use with UPnP™. The AXIS 282/AXIS 282A can have both a Link-Local IP and a
static/DHCP-supplied IP address at the same time - these will not affect each other.