User`s manual

41
AXIS 282/AXIS 282A - Pan Tilt Zoom
Preset Positions
Also available with many PTZ devices are Preset positions. These presets are selected from
the drop-down Source list on the Live View page and will move and/or zoom the camera
to a pre-defined position, i.e. to cover an area of particular interest. Events can also be
configured to go to preset positions when triggered. For information on setting up preset
positions, please see Preset Positions,
on page 38 and the online help.
Guard Tour
A guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined
order or at random, and for configurable time periods. Unlike the Sequence Mode, which is
a viewing application under Live View Config (see Live View Config, on page
27), the
guard tour sequence will keep running
after the user has logged off or closed the Web
browser.
Advanced
Device Settings - The device settings window is for driver specific settings, so the
appearance of this window can vary depending on the driver installed. Options that can be
configured include: Driver Specific Settings for Video Source 1, Mechanical Limits for
Moving Video Source 1, Light Control for Video Source 1, and Extended Driver Specific
Settings for Video Source 1.
Control Settings - This page provides the tools for man
aging the different controls
provided for PTZ. The Panel Shortcut Command Button list provides the controls for
creating and saving Panel Shortcut Command Buttons. These buttons provide direct access
to various built-in auxiliary commands provided by the PTZ driver. The buttons are
displayed in the PTZ Panel, which is available on the Live View page by clicking the Ctrl
panel button.