User`s manual

38
AXIS 282/AXIS 282A - Pan Tilt Zoom
PTZ Configuration
Once PTZ has been installed for the AXIS 282/AXIS 282A, PTZ Configuration now appears
in the menu to the left along with the following submenus.
Preset Positions
A preset position is a pre-defined camera view than can be used to quickly move the
camera to a specific location.
In the Preset Position
Setup page, use the Pan, Tilt and Zoom (PTZ) controls to steer the
camera to the required position. When satisfied with the camera's position, enter a
descriptive name. The camera position, iris and focus settings are then saved as a preset
position.
The position can be assumed at any
time, by selecting the preset's name from the Preset
positions drop-down list. Preset positions can be selected in Live View, from events and in
Sequence mode.
One position can be set as the Hom
e position, which is readily accessible by clicking in the
box beside Use current position as Home. The position's name will then have (H) added,
e.g. Office Entrance (H).