User`s manual

29
AXIS 282/AXIS 282A - Live View Config
Viewer Settings
Show viewer toolbar - - Check this box to display the viewer toolbar under the image
in your browser. The toolbar provides various controls for e.g. pausing the video stream,
switching to full screen mode, etc.
Enable MPEG-4 decoder installation - - By checking/unchecking this box, the
administrator can en
able or disable the installation of the MPEG-4 decoder included with
AMC. This is used to prevent the installation of unlicensed copies. Further decoder licenses
can be purchased from your Axis dealer.
Show crosshair in PTZ joystick mode - - This cross indicates the c
enter of the image
when viewing the video stream in PTZ joystick mode.
Use PTZ joystick mode as default - - Enabling this sets the PTZ mode to joystick.
The
mode can be changed temporarily on the PTZ Control Panel, but will default to joystick if
this is selected.
Enable recording button - - Enabling this button allows the user to st
art a recording
directly from the Live View page. The recording is saved in the folder specified in the
Recording tab in the AMC Control Applet. Note that this button is only available when
viewing with AMC.
Action Buttons
These buttons can be used to manually trigger and stop an event from the Live View page.
See Event Servers, on page
31. The snapshot button allows you to take a snapshot of the
video stream and save it to a computer.
User Defined Links
Enter a descriptive name for the link and enter the
URL in the provided field. The link appears in the
Live View page.
User defined CGI links can be used to issue HTTP
API r
equests, such as PTZ commands. Example:
1. Check Show Custom Link 1
2. Enter a descriptive name, such as CAM1 Start
PTZ.
3. Enter the cgi link:
http://192.168.0.125/axis-cgi/com/ptz.cgi?came
ra=1&continuouspantiltmove=30,-30
4. Check Show Custom Link 2.
User Defined Links