User`s manual

11
AXIS 282/AXIS 282A - Using the Video Server
The Video Format drop-down list allows the
video format on the Live
View page to be temporarily changed.
The Output buttons control an output directly from the Live View page. These
buttons are configured under Setup > Live View Config > Layout.
Pulse
- click this button to activate the port for a defined period of time, such
as to switch on a light for 20 seconds.
Active/Inactive - click these buttons to man
ually start and stop a connected
device, such as switching a light on/off.
These buttons start/stop the Sequence Mode. This mode is created in Setup >
Live View Config > Sequence mode and automatically displays the view
from 2 or more video sources at set intervals.
From the Source list, select the desired video image(s). The list can
contain internal video sources, external video sources, or PTZ presets.
The Action buttons trigger an event directly from the Live View page. These
buttons are configured under Setup > Live View Config > Layout. Click these
buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image displayed in the
window. Right-click on the image to save it in on your computer.
The AMC viewer
toolbar (AXIS Media Control) is available in Microsoft Internet
Explorer only and displays the following buttons:
The Play/Stop buttons start and
stop the media stream.
The Sn
apshot button takes a snapshot of the displayed image. The Snapshot
function and the target directory for saving
snapshots can be configured from
AMC (AXIS Media Control), which is available from the Windows Control Panel
(Internet Explorer only).
Click the View Fu
ll Screen button and the video image will fill the entire screen
area. Press Esc
(Escape) on your keyboard to cancel full screen view.