User`s manual

AXIS 282/282A - Installation

ARP and Ping in UNIX/Linux

Assign your product with a unique IP address from a computer on your network, as

follows:

1. Acquire an unused IP address for the AXIS 282/282A from your network

administrator.

2. Connect the AXIS 282/282A to the network using a standard network cable.

3. Find the serial number (S/N) located on the memory capsules on top of the AXIS

282/282A.

4. Start/restart the AXIS 282/282A. This must be done no later than 2 minutes after

entering the ARP and Ping commands.

5. Close the ARP/Ping session when ‘Reply from 192.168.0.125: ...’ (or similar) is

displayed (approximately 10-15 seconds).

6. Start a browser and enter the IP address in the Address/Location field.

7. Press Enter.

8. Enter a password for the root user (administrator).

9. The installation is now complete. Proceed to Using the Video Server, on page 9.

Syntax:

arp -s <IP Address> <Serial number> temp

ping -s 408 <IP address>

Example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp

ping -s 408 192.168.0.125