AXIS 282/282A Bare Board Video Server Installation Guide
AXIS 282/282A Installation Guide Page 1 AXIS 282/282A Bare Board Video Server Installation Guide This installation guide is applicable for the following Axis Video Servers: •AXIS 282: 1-port bare board video server •AXIS 282A: 1-port bare board video server including 2-way audio For a complete description, get the AXIS 282/282A Bare Board Video Server User’s Manual online from Axis Web site, www.axis.
AXIS 282/282A Installation Guide Page 2 AXIS 282/282A Top Mounting holes Network connector Terminal I/O connector 34-pin header Mounting hole Mounting hole Not included: •4 M2 screws - needed for mounting AXIS 282/282A •34 pin IDC female connector (2mm)
AXIS 282/282A Installation Guide Page 3 The Terminal I/O Connector The AXIS 282/282A provides one 4-pin terminal I/O connector. Pin Function 1 Power in/out (8 - 20V) 2 GND 3 Alarm In 4 Alarm Out 1 2 3 4 Note: Pins 3 and 4 in the Terminal I/O Connector are the same Alarm In and Alarm Out as pins 8 and 9 in the 34-Pin Header. If the AXIS 282/282A has been configured to have power going in through the 34 I/O pins, power can be configured to go out through pin 1 of the Terminal I/O Connector.
AXIS 282/282A Installation Guide Page 4 The 34-Pin Header The AXIS 282/282A has a 34-Pin Header to be used with a 2mm IDC connector. Connections include: •Serial port, configurable as RS-232 or RS-485, which is typically used for connecting Pan/Tilt/Zoom devices.
AXIS 282/282A Installation Guide Page 5 Schematic Diagram - 34 I/O Pins Note: Pins 8 and 9 in the 34-Pin Connector are the same Alarm In and Alarm Out as pins 3 and 4 in the Terminal I/O Connector.
Page 6 AXIS 282/282A Installation Guide AXIS 282/282A Bottom Power LED Network LED Status LED Control button Flash button LED indicators - See AXIS 282/282A User’s Manual for a complete listing of the status of the colored Status, Network, and Power indicators. Control button - Used to restore the factory default settings, as described in AXIS 282/282A User’s Manual. Flash button - The AXIS 282/282A has a flash button.
AXIS 282/282A Installation Guide Page 7 Integration of the AXIS 282/282A Mechanical integration may be done through the 4 mounting holes on the AXIS 282/282A, shown in the figure below. Electrical integration of the AXIS 282/282A is done through the connectors described here.
AXIS 282/282A Installation Guide Page 8 Technical Specifications Item Specification Models • AXIS AXIS 282: 1-channel bare board video server • AXIS AXIS 282A: 1-channel bare board video server with two-way audio Audio features • G.711 PCM 64kbit/s, G.
AXIS 282/282A Installation Guide v1.0 Copyright © Axis Communications AB, 2006 August 2006 Part No.
