User`s manual

7
AXIS 262+ Product Description
AXIS 262+ front panel
Indicators - on the front panel provide useful information about the current status of the
AXIS 262+. The LED indicators on the AXIS 262+ indicate the following:
Note:
Note that the indicator LEDs are tested during startup. The Status, Network and Disk LEDs show red for 1
second, and the Power LED shows amber for 1 second.
Disk
Green Flashes when the hard disk is accessed.
Red Shows steady for failed reset to factory default, failed firmware upgrade, failed data-
base repair, or for a hard disk error.
To save recorded video stored on the hard disk drive, download the video to your PC and
then restart the AXIS 262+ to return the hard disk to its normal state.
Network
Amber Flashes for activity on a 10 Mbps network.
Green Flashes for activity on a 100 Mbps network.
None No connection.
Status
Green Shows steady green for normal operation.
Amber Flashes during a reset to the factory default settings.
Red Flashes red in combination with red disk LED for failed reset to factory default, failed
firmware upgrade, or failed database repair. Flashes red without red disk LED to indicate
that the database is being repaired, which may take up to 30 minutes.
Power
Green Normal operation.
Amber Flashes green/amber during a firmware upgrade.
Disk Network Status Power