User`s manual

37
AXIS 262+ Technical Specifications
Technical Specifications
Item Specification
Video compression Motion JPEG
Compatibility Compatible with all Axis network video products running firmware 4.15 and
higher.
Recording frame rate • Up to 240 frames per second in QVGA or CIF
• Up to 120 frames per second in VGA or 4CIF
Recording storage 250 GB hard disk drive with Anti-Vibration
Video channels 8 video channels
Resolution Unlimited (always the same as camera’s resolution, with no degradation).
Camera live view All cameras can be monitored through AXIS 262+.
Live sequence mode Several configuration options for how the AXIS 262+ will sequence through the
video sources.
Audio Support Full duplex live audio support through direct connection to audio enabled
cameras and servers. No audio recording.
PTZ support Control of all Axis PTZ and dome cameras through direct connection to camera.
Alarm recording Recordings can be started by HTTP notification from a network camera/video
server or by a trigger from a digital input on the AXIS 262+.
Alarm recording frame rate The frame rate for alarm recordings can be specified independently from the
frame rate of scheduled recordings.
Scheduled recording Recordings can be scheduled for the various video sources, with different frame
rates.
Manual recording Capability to manually start a recording with a predefined frame rate.
Playback Playback of recorded material, fast forward, fast reverse, single step forward and
reverse.
Synchronized playback Playback of video synchronized in time from up to 4 video sources simultaneously.
Search for recordings Search for recordings based on date and time.
Video clip export Part of a recording can be downloaded to a remote computer.
Time synchronization Date and time in the cameras and video servers are synchronized with the date
and time in the AXIS 262+. The date and time in the AXIS 262+ can be
synchronized with an external NTP server.
Daylight saving time Different time zones are supported.
System alarm notification • Output 1: Alarm recording status
• Output 2: Channel lost status
• Output 3: Hard disk error
• Output 4: Hard disk full
• Alarm notification via email if failure on hard disk or system
Security Multiple user access levels with password protection
Connectors • Ethernet 10BaseT/100BaseTX, RJ-45
• Terminal block: 4 alarm inputs, 4 outputs
• D-Sub for RS-232 port for UPS (Uninterruptible Power Supply)