User`s manual

28
AXIS 262+ System Options
System Options
Date & Time
The date and time is displayed when viewing recorded or live video (right-click on an
image and select Show Date/Time to make it visible if it is not shown). The time and date
are saved along with the image and it is important that the date and time are set accurately
when you want to find a recording at a later time.
You can manually set the date and time used for the AXIS 262+ or specify a Network Time
Protocol (NTP) server to automatically update the time. You can also enter the time zone
and the date format displayed on recorded images.
Note:
Changing the time zone will cause the AXIS 262+ to restart, and recording will be stopped during this time
(maximum 10 minutes).
To set the time in the AXIS 262+ manually:
1. Click > Date & Time in the AXIS 262+’s Web pages.
2. Select the Set manually radio button.
3. Enter the current date and time.
4. Click Save.
5. Select Time Zone and click Save.
6. Specify Date Format Used in Images and click Save.
Synchronize the time in the AXIS 262+ with an NTP server:
1. Click > Date & Time in the AXIS 262+’s Web pages.
2. Select the Synchronize with NTP server radio button.
3. Enter the IP address of a Primary NTP server and how often to synchronize the
time with the NTP server under Query interval time.
4. Click Save
5. Select Time Zone and click Save.
6. Specify Date Format Used in Images and click Save.