User`s manual

21
AXIS 262+ Recording Video
TCP notification alarm recording configuration:
To receive TCP messages a primary TCP server needs to be configured. The TCP server must
contain a special application program for receiving notifications. Note that TCP messaging
is optional.
1. Select ON for TCP notification for
the desired camera under Alarm
Recording Configuration.
2. Enter desired text for when
recording starts and stops.
3. Click Save.
4. Select the ON radio button to enable
TCP notification under TCP
Notification Configuration.
5. Enter the IP address/host name and TCP port number of the primary TCP server
(Optionally a secondary server).
6. Click Save.
Manual recordings
Recording can be started manually for one or all of the cameras in the Main View. Each
camera view has buttons at the bottom right of the window to start and stop recording. In
the Select camera tab there are buttons to start and stop recording on all cameras.
Click to start recording on this camera
Click to stop recording on this camera
Click to start recording on all cameras
Click to stop recording on all cameras