User`s manual

AXIS 262+ Main View Config

View quad patterns

Once a quad pattern has been created, it can then be viewed in the Main View page. You

can also select which quad pattern you want to view. Select the quad pattern view and

then select the pattern you want to view from the quad pattern tab.

Note:

You can select to watch video from the four cameras at the same point in time by selecting the

Synchronize button.

Automatic sequence

A sequence will automatically switch between cameras or between quad patterns in the

Main View.

1. Open the automatic sequence tab.

2. Select the cameras or quad patterns to include in the sequence.

3. Click to start the camera or quad view sequence.

4. Click the stop button to stop the sequence.

Note:

You must select at least two cameras/quad patterns to start a sequence.

Quad pattern view

Select the quad

pattern to view

Click to synchronize playback from the four cameras

Quad pattern tab

Edit the interval between views

Camera sequence

Quad pattern sequence

Stop sequence

Automatic

Sequence tab

Select cameras

or quad patterns