Operating instructions

- 11 -
Installing Axis 233 Camera
1. Note the position of the mounting holes on the camera
bracket (see diagram below).
5. Turn the camera counter clockwise.
6. When the locking
buttons hit the end
of the keyhole
slots, tighten
the locking
screw.
2. Now attach (4) ½” spacers
(located in the packet
that came with
the housing)
to the base
bracket.
3. Mount the
camera
bracket to
the Axis 233
camera
Q/R plate
(Quick
Release
plate) as
shown.
Keyhole Slots
4. Place the Quick Release plate onto the bottom of the
camera,
Make sure that the
locking screws
on the AXIS 233
camera line up
with the keyhole
slots on the Q/R
plate.
Slide the
camera into
the keyhole
slots by
targeting
the locking
screw(s).
Quick Release
(Q/R) plate
Keyhole Slots
Locking Screw
Keyhole Slots
Mounting holes
Mounting holes
½"