Installation guide

AXIS 250S Blade - Rack Solution Installation Guide

AXIS 250S Blade Video Server

Read the following information to familiarize yourself with the AXIS 250S Blade video

server making particular note of where the connectors and indicators are located:

Control Button

See the AXIS 250S User’s Manual for information on the use of the

control button.

Control Button

Indicators

Connectors

Product Label

S/N (serial number) is identical to the unit’s MAC/Ethernet address, e.g. 00408C1A2B3C =

00-40-8C-1A-2B-3C. P/N (part number) is the product model number.

Power Green Normal operation

Flashing green or unlit for power supply failure

Amber Flashes amber during firmware upgrade

Status Green Normal operation

Red Flashes rapid red for a critical error

Network Amber Flashes for activity on a 10 Mbit/s network

Green Flashes for activity on a 100 Mbit/s network

Red No network connection

None No connection

MIC Microphone connector

LINE Line connector

VIDEO IN Y/C video input

(S-video)

connection is made using an s-video cable

Video Input (BNC) connection is made using an RG59, 75 Ohm coax

video cable; with a recommended maximum

length of 800 feet (250 meters).

Top and bottom screws

are used to secure the

blade server in the rack

P/N: XXXX-YYY-ZZ

S/N: 00408C1A2B3C