User`s manual
Table Of Contents
- AXIS 2460 Network DVR
- About this document
- Product Overview
- Description
- Checking The Hardware Inventory
- Installing the AXIS 2460 Network DVR
- Connecting and Configuring Cameras
- Setting up Events and Alarms
- Working with Recordings
- System Options
- The Factory Default Settings
- Appendix A - Recording Storage and Reduction
- Appendix B - The LED Indicators
- Appendix C - Troubleshooting
- Appendix D - Other IP Setup Methods
- Appendix E - Updating the Firmware
- Appendix F - Installing Hard Disks
- Appendix G - Unit Connectors
- Appendix H - Technical Specifications
- Index
System Options AXIS 2460 User’s Manual
44
Synchronize with NTP Server - This option will cause the AXIS 2460 to obtain the correct time
from an NTP server. Specify the NTP server's IP address or DNS name and set the
appropriate time zone for the Recorder's location.
Set manually - Using this option allows you to manually enter the time and date.
Automatically adjust for daylight saving time changes - Check this box to automatically update
the time changes caused by daylight saving.
Important!
If a user or an NTP-server puts the clock back, this may lead to there being several recordings from the
same point in time (although they were actually recorded at different times). This might also mean that
a recording ends before it starts! (at least according to the local time seen by the user). Most impor-
tantly, all of the recordings stored on the AXIS 2460 are always available - even if the clock is set back.