User`s manual
Table Of Contents
- AXIS 2460 Network DVR
- About this document
- Product Overview
- Description
- Checking The Hardware Inventory
- Installing the AXIS 2460 Network DVR
- Connecting and Configuring Cameras
- Setting up Events and Alarms
- Working with Recordings
- System Options
- The Factory Default Settings
- Appendix A - Recording Storage and Reduction
- Appendix B - The LED Indicators
- Appendix C - Troubleshooting
- Appendix D - Other IP Setup Methods
- Appendix E - Updating the Firmware
- Appendix F - Installing Hard Disks
- Appendix G - Unit Connectors
- Appendix H - Technical Specifications
- Index
Installing the AXIS 2460 Network DVR AXIS 2460 User’s Manual
14
Verifying and Completing the Installation From Your Browser
1. Start your browser and enter the IP address of your AXIS 2460 in the location/address
field. Any cameras connected to the unit will be shown as disabled. Click the links
provided to enable them. See also Connecting and Configuring Cameras on page 18.
2. After connecting and enabling your cameras, live images will then be visible in your
browser. To see the image from a single camera, click on the camera link above the
images.
3. Continue the unit’s configuration using the Administration Tools.
The Administration
tools.
Links to individual
cameras.