AXIS 241Q and AXIS 241S Video Servers User’s Manual Installation instructions are also available in German, French, Italian and Spanish in this manual
About This Document This manual is intended for administrators and users of the AXIS 241Q/241S Video Server, and is applicable for software release 4.00. It includes instructions for installing, using and managing the AXIS 241Q/241S on your network. Previous experience of networking will be of use when installing and using this product. Some knowledge of UNIX or Linux-based systems would also be beneficial, for developing shell scripts and applications.
AXIS 241Q/241S Table of contents Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hardware Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AXIS 241Q Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AXIS 241S Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS 241Q/241S Unit Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 The D-Sub Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 The I/O Terminal Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 COM Port RS232/PTZ and COM Port RS485. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS 241Q/241S - Product Description Product Description The AXIS 241Q/S is a new generation, full-featured video server for security surveillance and remote monitoring needs, based around the new AXIS ARTPEC-2 compression chip. It has the ability to digitize up to 4 analog video sources and make these available on the network as streams of real time full frame rate Motion JPEG video.
AXIS 241Q/241S - Product Description AXIS 241Q Front Panel Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, Power Indicators flash as follows: Network Status Power Amber Flashes for activity on a 10 Mbit/s network Green Flashes for activity on a 100 Mbit/s network Red Flashes rapid red for hardware error, together with the Status indicator None No connection Green Normal operation Amber Flashes during reset to factory default or at fi
AXIS 241Q/241S - Product Description AXIS 241S Front Panel Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, Power Indicators flash as follows: Network Status Power Amber Flashes for activity on a 10 Mbit/s network Green Flashes for activity on a 100 Mbit/s network Red Flashes rapid red for hardware error, together with the Status indicator None No connection Green Normal operation Amber Flashes during reset to factory default or at firmw
AXIS 241Q/241S - Product Description AXIS 241Q/241S Rear Panel The Serial Number is located on the label on the underside of the unit. Power Supply Connector - A single socket for connection of the PS-K power supply. The I/O Terminal Block provides an auxiliary connection point for DC power. I/O Terminal Block - The I/O Terminal Block provides the physical interface to 4 digital transistor outputs, 4 digital inputs and an RS-485 interface. See Unit Connections, on page 39 for more information.
AXIS 241Q/241S - Installing the AXIS 241Q/241S Installing the AXIS 241Q/241S Mounting the AXIS 241Q/241S The AXIS 241Q/241S is supplied with a mounting kit for wall mounting or rack mounting. The mounting brackets can be positioned for mounting the video server on a vertical surface or in a rack (4U).Follow the instructions below to attach the mounting bracket to the video server: 1. Slide the grey frame off the front panel of the video server (no tools needed). 2 1 3 2.
AXIS 241Q/241S - Installing the AXIS 241Q/241S Manual Installation using AXIS IP Utility AXIS IP Utility is a Windows software application that installs the AXIS 241Q/241S to your local network using a static IP address. • Download the AXIS IP Utility software to your computer, free of charge from the Support pages at http://www.axis.com/techsup/software • Double-click the setup.exe file and follow the on-screen instructions to install the software on your computer.
AXIS 241Q/241S - Installing the AXIS 241Q/241S Manual Installation using ARP and Ping in Windows Assign your product with a unique IP address from a computer on your network, as follows: 1. Acquire an unused IP address for the AXIS 241Q/241S from your network administrator. 2. Connect a standard network cable to your AXIS 241Q/241S and connect it to the network. 3. Locate the serial number/MAC Address (S/N) found on the label on the underside of the AXIS 241Q/241S. 4.
AXIS 241Q/241S - Installing the AXIS 241Q/241S Manual Installation using ARP and Ping in UNIX/Linux Assign your product with a unique IP address from a computer on your network, as follows: 1. Acquire an unused IP address for the AXIS 241Q/241S from your network administrator. 2. Connect a standard network cable to your AXIS 241Q/241S and connect it to the network. 3. Locate the serial number/MAC Address (S/N) found on the label on the underside of the AXIS 241Q/241S.
AXIS 241Q/241S - Installing the AXIS 241Q/241S AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service provides a one-click procedure that makes the AXIS 241Q/241S available on your local network and over the Internet. On installation, the AXIS 241Q/241S will receive a URL (web address), which can then be used to access it. The video server can be unregistered from the service at any time. Please visit www.axiscam.net for more details on AXIS Internet Dynamic DNS Service.
AXIS 241Q/241S - Using the video server Using the video server The AXIS 241Q/241S can be used with most standard operating systems and supports Microsoft Internet Explorer 5.x or later, Netscape 7.x or later and Mozilla 1.4 or later Note: To be able to view streaming video in Microsoft Internet Explorer, you must set your Web browser to allow ActiveX controls and also allow that AXIS Media control (AMC) is installed on your workstation.
AXIS 241Q/241S - Using the video server If the AXIS 241Q/241S has been customized, the buttons described below will be displayed accordingly on the Live View page. The following provides an overview of each button: To resize the displayed image, click the View Size buttons: half-size (x1/2), full-size (x1), x2 or x4. This will not change the resolution of the image (not available in Sequence Mode). The Output buttons control an output directly from the Live View page.
AXIS 241Q/241S - Using the video server Pan/Tilt/Zoom controllers: (only available if there is a PTZ camera and driver configured) Depending on the uploaded PTZ driver, the Live View page will display the available Pan/Tilt/Zoom controllers. The administrator can also enable/disable the controller for specified users. Pan/Tilt/Zoom Control Queue: This area indicates that the video source supports queues.
AXIS 241Q/241S - Configuring the video server Configuring the video server This section describes how to configure the AXIS 241Q/241S and is intended for the product administrator who has unrestricted access to all Setup tools and Operator who has access to Video & Image, Live View Config and Event Configuration. The AXIS 241Q/241S is configured under Setup from a standard browser (see Supported Web Browsers, on page 47).
AXIS 241Q/241S - Configuring the video server Basic Configuration The links under Basic Configuration are shortcuts providing a convenient way to make the necessary basic settings the first time the unit is configured. Tools Settings / Options / Description Instructions General Instructions Users See System Options | Security | Users below TCP/IP See System Options | Network | TCP/IP below.
AXIS 241Q/241S - Configuring the video server System Options (Administrator) Tools Settings / Options / Description Security Users Access to the video server can be restricted to defined users only (maximum of 20). The administrator has unrestricted access to the Setup tools and determines rights for users at 3 levels; Administrator, Operator, Viewer. IP Address Filter Once enabled, only the IP addresses shown in the list of allowed addresses will be permitted to access the Video Server.
AXIS 241Q/241S - Configuring the video server Using the Setup Tools The following descriptions offer examples of the available features in the AXIS 241Q/241S. For details of each setting, please refer to the online help files which are available from each page. Click to access the help files. Video 1(-4) Settings Modify Image Appearance to optimize the video images according to your requirements.
AXIS 241Q/241S - Configuring the video server Overlay Settings Include an image, e.g. your company logo and date and time with your own text which is placed on one line at the top or bottom of the video image. To upload an overlay image, see Overlay Image Settings, on page 22. Date, time and text Overlay image An overlay image can be used to mask out parts of the video image, e.g. for privacy reasons.
AXIS 241Q/241S - Configuring the video server Overlay Image Settings An overlay image is an image included in the video image. This might, for example, be your own company logo. Follow these instructions to upload and use an overlay image: 1. To upload the file (a logo or image) to the AXIS 241Q/241S, click the Browse button and locate it on your computer or server. 2. Click the Upload button and follow the on-screen instructions. 3. The image is now available in the Use overlay image drop-down list. 4.
AXIS 241Q/241S - Configuring the video server Live View Config You can customize the features on the AXIS 241Q/241S Live View page to suit your own requirements, or you can upload and use a custom web page. This is done by the administrator from Setup | Live View Config | Layout. Click the radio button Use custom settings and click Configure The setup address is http:///operator/basic.shtml. Upload Own Web Files Your own web files, background picture, color etc.
AXIS 241Q/241S - Configuring the video server 3. When the path is shown correctly in the text field, click the Upload button. All uploaded files are shown in the list in the lower section of the page. To remove a file, check the box provided next to it and then click the Remove button.
AXIS 241Q/241S - Configuring the video server Output Buttons - These buttons can then be used to manually start and stop an event from the Live View page, e.g. switch on/off a light: • The Pulse button activates the port for a defined period • Active/Inactive displays 2 buttons, one for each action (on/off) Default Viewer for your Browser - select the appropriate radio button to define your method for viewing moving images depending on your Web browser and settings.
AXIS 241Q/241S - Configuring the video server Sequence Mode The live view page can be configured to rotate through selected internal and/or external video sources, in order or randomly. Select the desired video sources and enter the time in seconds to display each source (up to 59 minutes). Click Save. The Sequence buttons will appear on the Live View page to enable the viewer to start and stop the sequence mode. Please use the online help files for more information.
AXIS 241Q/241S - Event Configuration Event Configuration This section describes how to configure the AXIS 241Q/241S for alarm handling. The AXIS 241Q/241S can be configured to perform certain actions when certain types of events occur. Event type A set of parameters describing how and when the video server is to perform certain actions Triggered Event page 28 the circumstances that start an event e.g.
AXIS 241Q/241S - Event Configuration Event Types An Event Type is a set of parameters describing how and when the video server is to perform certain actions. Example: If somebody walks past the connected camera, and an event has been configured to act on this, the video server can e.g. record and save video images to an FTP server or send a notification email to a pre-configured email address with a pre-configured message. The video images can be sent as an attachment with the email.
AXIS 241Q/241S - Event Configuration Pre-trigger and Post-trigger buffers This function is very useful when checking to see what happened immediately before and after a trigger, e.g. 2 minutes before and after a door has been opened. Check the Upload images checkbox under Event Types | Add Triggered... | Triggered by... to expand the web page with the available options. Buffer size - AXIS 241Q - up to 36 MB buffer; AXIS 241S - up to 9 MB buffer.
AXIS 241Q/241S - Event Configuration 6. Set the When Activated... parameters i.e. set what the video server is to do at the specified time e.g. send uploaded images to an email address. 7. Click OK to save the Event in the Event Types list. Please use the online help files for descriptions of each available option. Motion Detection In the Motion Detection menu, you can configure Video 1-4 for motion detection.
AXIS 241Q/241S - Event Configuration 4. Click New. 5. Enter a descriptive name of your choice under Windows name. 6. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top and drag to the desired position). 7. Adjust the Object size, History and Sensitivity profile sliders (see table below for details). Any detected motion within an active window is then indicated by red peaks in the Activity window (the active window has a red frame). 8. Click Save.
AXIS 241Q/241S - System Options System Options Security User access control is enabled by default, the administrator sets the root password on first access.
AXIS 241Q/241S - System Options HTTPS HTTPS provides encryption for user page requests to and from the AXIS 241Q/241S. The AXIS 241Q/241S can be configured for use with HTTPS, as described below. Certificate - to use HTTPS for communication with the AXIS 241Q/241S, a Certificate must be created using one of these methods: • A self-signed certificate can be created in the video server but this can not guarantee the same level of security as an official certificate.
AXIS 241Q/241S - System Options Date & Time Format Used in Images - specify the formats for the date and time (12h or 24h) displayed in the Live View video streams. Use the predefined formats or use your own custom date and time formats. See Advanced File Naming & Date/Time Formats in the help files for information on how to create your own file formats.
AXIS 241Q/241S - System Options Host Name Configuration The AXIS 241Q/241S can be accessed using a host name, instead of an IP address. The host name is usually the same as the assigned DNS Name. It is always the first part of a Fully Qualified Domain Name and is always one word, with no period. For example, myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com.
AXIS 241Q/241S - System Options SMTP (email) (Simple Mail Transfer Protocol) Enter the host names or addresses for your primary and secondary mail servers in the fields provided to enable event and error email messages from the video server to predefined addresses, via SMTP. UPnP (Universal Plug and Play) The video server includes support for Universal Plug and Play (UPnP) in Windows Millennium and Windows XP. UPnP is enabled by default. Note: UPnP must be installed on your workstation.
AXIS 241Q/241S - System Options Support The support overview page provides valuable information on troubleshooting and contact information, should you require technical assistance. Logs & Reports - when contacting Axis support, please be sure to provide a valid Server Report with your query. View Information - The Log report and the Parameter List also provide valuable information for troubleshooting and when contacting Axis’ support service.
AXIS 241Q/241S - System Options Resetting to Factory Default Settings To reset the AXIS 241Q/241S to the original default settings, go to the System Options | Maintenance web page (described in Maintenance, on page 36) or use the control button on the AXIS 241Q/241S as described below: Using the Control Button Follow the instructions below to reset the AXIS 241Q/241S to factory default settings using the Control Button. 1. Switch off the AXIS 241Q/241S by disconnecting the external power supply. 2.
AXIS 241Q/241S - Unit Connections Unit Connections The following connections are described in this section: • • • • The D-Sub Connector, on page 39 The I/O Terminal Block, on page 40 COM Port RS232/PTZ and COM Port RS485, on page 41 Y/C TO BNC CABLE (AXIS 241S only), on page 43 The D-Sub Connector The AXIS 241Q/241S provides one 9-pin D-sub connector, providing the physical interface for an RS-232 port, used for connecting accessory equipment; such as stand-alone Pan/Tilt devices for the remote positioni
AXIS 241Q/241S - Unit Connections The I/O Terminal Block This section describes the pinout and interface support provided by the 12-pin I/O Terminal Block consisting of: • 4 digital transistor outputs • 4 digital inputs • an RS-485 interface • auxiliary power and GND The Terminal Block is used in applications for e.g. motion detection, event triggering, time lapse recording, alarm notification via email, picture storage to FTP locations. • Inputs - e.g. a doorbell.
AXIS 241Q/241S - Unit Connections COM Port RS232/PTZ and COM Port RS485 The COM Port RS232/PTZ and COM Port RS485 support several operational modes: • Generic TCP/IP - enables the video server to receive status/data and send commands via TCP/IP • Generic HTTP - enables the video server to receive status/data and send commands via HTTP • Pan Tilt Zoom - for controlling a Pan Tilt Zoom device. A PTZ device requires a driver for its function. Drivers may be obtained from www.axis.
AXIS 241Q/241S - Unit Connections Schematic Diagram - Terminal Connectors Switch Mode Power Supply 3.3V AXIS 241Q/241S Video Server + o PS-K 9W o ! 1 o GND 2 o e.g.
AXIS 241Q/241S - Unit Connections Y/C TO BNC CABLE (AXIS 241S only) The AXIS 241S supports conversion from Y/C (S-video) to composite video using an Y/C to BNC cable. The cable is available as an accessory - see the Axis Web site at: http://www.axis.com. Follow these instructions to connect the Y/C to BNC cable: 1. Connect the BNC connector marked IN to the Video In connector on the video server. 2. Connect the BNC connector marked OUT to the Video OUT connector on the video server. 3.
AXIS 241Q/241S - Troubleshooting Troubleshooting Checking the Firmware One of your first actions when troubleshooting a problem should be to check the currently installed firmware version. The latest version may contain a correction that fixes your particular problem. The current software version in your AXIS 241Q/241S is available under Setup | Basic Configuration. Updating the Firmware The firmware is software that determines the functionality of the AXIS 241Q/241S.
AXIS 241Q/241S - Troubleshooting Support If you contact the Axis support desk, please help us help you resolve your problems expediently by providing a server report, log file and a brief description of the problem. Server Report - go to Setup | System Options | Support Overview. The server report contains important information about the server and its software, as well as a list of the current parameters. Log file - go to Setup | System Options | Logs & Reports.
AXIS 241Q/241S - Troubleshooting The Status indicator is flashing red rapidly Hardware failure Contact your Axis dealer. Status led is flashing red and the server is inaccessible A firmware upgrade has been A rescue firmware is running in the product. First, set the IP address using AXIS IP utility or ARP interrupted or the firmware has and Ping, see Installing on a network, on page 9.
AXIS 241Q/241S - Technical Specifications Technical Specifications Detail Specification System Requirements Standard Internet TCP/IP suite of protocols Supported Web Browsers Windows - Microsoft Internet Explorer 5.x or later and Mozilla 1.4 or later Linux - Mozilla 1.4 or later Mac OSX - Netscape 7.x or later or Mozilla 1.4 or later Installation Physical network connection using RJ-45 twisted pair cable & AXIS PS-K Power Supply.
AXIS 241Q/241S - Technical Specifications Detail Specification Hardware ARTPEC-2 compression chip ETRAX-100 LX (32-bit RISC, 100MIPS CPU) AXIS 241Q - 64MByte RAM AXIS 241S - 32MB RAM 8 MByte FLASH Power 2 alternative power sources: External power supply included: 9V DC, 9W (PS-K) 7-20V DC, min 7W Complimentary Software AXIS Media Control (AMC) - ActiveX component software required for Microsoft Internet Explorer - installed automatically on first use Optional: AXIS IP Utility - Windows installa
AXIS 241Q/241S - Installieren des AXIS 241Q/241S 49 Installieren des AXIS 241Q/241S Montage des AXIS 241Q/241S Der AXIS 241Q/241S wird mit einem Montagesatz für Wandanbringung oder Rackeinbau geliefert. Befolgen Sie die nachstehenden Anweisungen für die Anbringung der Halterung des Videoservers: 1. Den grauen Rahmen vorn am Videoserver abziehen (werkzeugfrei). 2. Die Metallplatten in die Schlitze auf beiden Seiten des Videoservers schieben. 2 1 3 3.
AXIS 241Q/241S - Installieren des AXIS 241Q/241S Manuelle Installation mit AXIS IP Utility AXIS IP Utility ist eine Anwendungssoftware von Windows, mit der der AXIS 241Q/241S über eine statische IP-Adresse in Ihrem lokalen Netz installiert wird. • Die AXIS IP Utility-Software von den Support-Seiten unter http://www.axis.com/techsup/software herunterladen, sie ist kostenlos. • Die Datei setup.exe doppelklicken und die Installationsanweisungen auf dem Bildschirm befolgen.
AXIS 241Q/241S - Installieren des AXIS 241Q/241S Manuelle Installation mit ARP und Ping in Windows Weisen Sie Ihrem Produkt wie folgt eine individuelle IP-Adresse von einem Computer Ihres Netzwerks aus zu: 1. Eine nicht benutzte IP-Adresse für den AXIS 241Q/241S von Ihrem Netzwerk-Administrator erfassen. 2. Ein Standard-Netzkabel an Ihren AXIS 241Q/241S anschließen und ihn damit ans Netz anschließen. 3. Die Seriennummer/MAC-Adresse (S/N) steht auf dem Aufkleber auf der Unterseite des AXIS 241Q/241S 4.
AXIS 241Q/241S - Installieren des AXIS 241Q/241S Manuelle Installation mit ARP und Ping in UNIX/Linux Weisen Sie Ihrem Produkt wie folgt eine individuelle IP-Adresse von einem Computer Ihres Netzwerks aus zu: 1. Eine nicht benutzte IP-Adresse für den AXIS 241Q/241S von Ihrem Netzwerk-Administrator erfassen. 2. Ein Standard-Netzkabel an Ihren AXIS 241Q/241S anschließen und ihn damit ans Netz anschließen. 3. Die Seriennummer/MAC-Adresse (S/N) steht auf dem Aufkleber auf der Unterseite des AXIS 241Q/241S.
AXIS 241Q/241S - Installieren des AXIS 241Q/241S 53 AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service bietet ein Ein-Klick-Verfahren an, das den AXIS 241Q/241S in Ihrem lokalen Netz sowie über das Internet verfügbar macht. Bei der Installation erhält der AXIS 241Q/241S eine URL-Adresse (Webadresse), über die dann der Zugang ermöglicht wird. Der Videoserver kann jederzeit vom Service abregistriert werden.
AXIS 241Q/241S - Installation du serveur AXIS 241Q/241S Installation du serveur AXIS 241Q/241S Montage du serveur AXIS 241Q/241S AXIS 241Q/241S est équipé d'un kit de montage pour support mural ou sur baie (rack). Suivez les instructions ci-dessous pour fixer le support de montage au serveur vidéo : 1. Faites glisser la structure du panneau avant du serveur pour l'enlever (pas besoins d'outils). 2 1 3 2. Insérez les plaques métalliques dans les logements aux côtés du serveur vidéo. 3.
AXIS 241Q/241S - Installation du serveur AXIS 241Q/241S Installation manuelle à l’aide de l’utilitaire AXIS IP L’utilitaire AXIS IP est une application logicielle de Windows permettant d'installer AXIS 241Q/241S sur votre réseau local à l’aide d’une adresse IP. • Téléchargez le logiciel Utilitaire AXIS IP sur votre ordinateur, gratuit des pages de support du site http://www.axis.com/techsup/software • Double-cliquez sur le fichier setup.
AXIS 241Q/241S - Installation du serveur AXIS 241Q/241S Installation manuelle à l'aide d’ARP and Ping sous Windows Affectez une adresse IP unique à votre ordinateur à partir d'un ordinateur du réseau, en procédant comme suit : 1. Acquérez une adresse IP non utilisée pour AXIS 241Q/241S en la demandant à votre administrateur de réseau. 2. Connectez un câble réseau standard à votre AXIS 241Q/241S et reliez-le au réseau. 3.
AXIS 241Q/241S - Installation du serveur AXIS 241Q/241S Installation manuelle à l'aide d’ARP and Ping sous Windows Affectez une adresse IP unique à votre ordinateur à partir d'un ordinateur du réseau, en procédant comme suit : 1. Acquérez une adresse IP non utilisée pour AXIS 241Q/241S en la demandant à votre administrateur de réseau. 2. Connectez un câble réseau standard à votre AXIS 241Q/241S et reliez-le au réseau. 3.
AXIS 241Q/241S - Installation du serveur AXIS 241Q/241S AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service propose une procédure d’un seul clic qui rend AXIS 241Q/241S disponible sur le réseau local et sur l’internet. A l’installation, AXIS 241Q/241S recevra une URL (adresse web), que vous pouvez utiliser pour l’accès. Le serveur vidéo peut être désactivé à tout moment.
AXIS 241Q/241S-Installazione di AXIS 241Q/241S 59 Installazione di AXIS 241Q/241S Montaggio di AXIS 241Q/241S AXIS 241Q/241S comprende un kit per montaggio a parete o su rack. Seguire le istruzioni in basso per collegare la staffa di montaggio al server video: 1.Estrarre il telaio grigio dal pannello del server video (non sono necessari attrezzi). 2 1 3 2.Inserire le piastre di metallo negli slot su entrambi i lati del server video. 3.
AXIS 241Q/241S-Installazione di AXIS 241Q/241S Installazione manuale mediante l'utility AXIS IP L'utility AXIS IP è un'applicazione software Windows che consente di installare AXIS 241Q/241S sulla rete locale mediante un indirizzo IP statico. • Scaricare gratuitamente il software AXIS Utility AXIS IP Utility sul computer, dalle pagine di supporto all'indirizzo http://www.axis.com/techsup/software • Fare doppio clic sul file setup.
AXIS 241Q/241S-Installazione di AXIS 241Q/241S Installazione manuale mediante ARP e Ping in Windows Assegnare al prodotto un indirizzo IP unico da un computer della rete, come segue: 1. Ottenere un indirizzo IP non utilizzato per AXIS 241Q/241S dall'amministratore di rete. 2. Collegare un cavo di rete standard ad AXIS 241Q/241S e poi collegarlo alla rete. 3. Individuare il numero di serie/indirizzo MAC (S/N) riportato sull'etichetta che si trova sotto ad AXIS 241Q/241S 4.
AXIS 241Q/241S-Installazione di AXIS 241Q/241S Installazione manuale mediante ARP e Ping in UNIX/Linux Assegnare al prodotto un indirizzo IP unico da un computer della rete, come segue: 1. Ottenere un indirizzo IP non utilizzato per AXIS 241Q/241S dall'amministratore di rete. 2. Collegare un cavo di rete standard ad AXIS 241Q/241S e poi collegarlo alla rete. 3.
AXIS 241Q/241S-Installazione di AXIS 241Q/241S 63 Servizio AXIS Internet Dynamic DNS Il servizio AXIS Internet Dynamic DNS offre una procedura che con un solo click rende AXIS 241Q/241S disponibile sulla rete locale e su Internet. Al momento dell'installazione, AXIS 241Q/241S riceve un URL (indirizzo Web) utilizzabile in seguito per accedervi. La registrazione per l'assistenza del server video può essere annullata in qualsiasi momento.
AXIS 241Q/241S - Instalación del AXIS 241Q/241S Instalación del AXIS 241Q/241S Montaje del AXIS 241Q/241S El AXIS 241Q/241S se suministra con un kit especial para montaje de pared o en un bastidor. Siga las instrucciones siguientes para fijar el soporte de montaje en el servidor de vídeo: 1. Retire el armazón gris del panel frontal del servidor de vídeo (no necesita herramientas). 2 1 3 2. Introduzca las placas metálicas en las ranuras a cada lado del servidor de vídeo. 3.
AXIS 241Q/241S - Instalación del AXIS 241Q/241S Instalación manual utilizando AXIS IP Utility AXIS IP Utility es una aplicación de software de Windows que instala el AXIS 241Q/241S en su red local utilizando una dirección IP estática. • Descargue el software AXIS IP Utility en su ordenador, de forma gratuita desde las páginas de Asistencia Técnica en http://www.axis.com/techsup/software • Haga doble clic en el archivo setup.
AXIS 241Q/241S - Instalación del AXIS 241Q/241S Instalación manual utilizando ARP y Ping en Windows Asigne una dirección IP única a su producto desde un ordenador de su red, de la siguiente manera: 1. Obtenga una dirección IP sin utilizar para el AXIS 241Q/241S desde su administrador de red. 2. Conecte un cable de red estándar a su AXIS 241Q/241S y conéctelo a la red. 3. El número de serie/dirección MAC (S/N) está situado en la etiqueta en el lado inferior del AXIS 241Q/241S. 4.
AXIS 241Q/241S - Instalación del AXIS 241Q/241S Instalación manual utilizando ARP y Ping en UNIX/Linux Asigne una dirección IP única a su producto desde un ordenador de su red, de la siguiente manera: 1. Obtenga una dirección IP no utilizada para el AXIS 241Q/241S desde su administrador de red. 2. Conecte un cable de red estándar a su AXIS 241Q/241S y conéctelo a la red. 3. Ubique el número de serie/dirección MAC (S/N) que está situado en la etiqueta en el lado inferior del AXIS 241Q/241S.
AXIS 241Q/241S - Instalación del AXIS 241Q/241S AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service proporciona un procedimiento de clic único que da acceso a AXIS 241Q/241S en su red local y a través de Internet. En la instalación, el AXIS 241Q/241S recibirá un URL (dirección web), que entonces se puede utilizar para accederlo. El servidor de vídeo se puede desinscribir del servicio en cualquier momento.
AXIS 241Q/241S - Index 69 Index A Action 27 Action Buttons 15, 24 Active/Inactive 15, 25 ActiveX Controls 14 Administrator 17, 32 Alarm 18, 27, 30, 40 AMC 10, 11, 13, 14, 15, 48 ARP and Ping 11, 12 AXIS Internet Dynamic DNS Service 13 AXIS IP Utility 10 B Backup 36 Basic Configuration 18 BNC CABLE 43 Buffer Size 29 Buffers 29 C CGI links 24 COM Port RS232/PTZ 41 COM Port RS485 41 Control Button 6, 7, 38 Customize 23 D Date & Time 18, 19, 33 DC Power 40 Default Viewer 25 Digital Input 40 DIP Switch 6
AXIS 241Q/241S - Index NTP Server 33 O Operator 32 Output Buttons 15, 25 Overlay Image 18, 22 Overlay Settings 21 Own Home Page 24 Own Web Files 23 P Pan Tilt Zoom 41 Pan/Tilt/Zoom Control Queue 16 Pan/Tilt/Zoom Controllers 16 Pinout 36 Pinout - I/O connectors 40 Plain Config 19 Port Status 18, 31 Ports & Devices 19, 36 Post-trigger Buffer 29 Power Supply 8 Pre-trigger Buffer 29 PTZ Commands 24 Pulse 15, 25 Q Serial Number 8 Services 34 Setup Tools 17 SMTP 19 Snapshot 15 SOCKS 19 Source 15 Support
AXIS COMMUNICATIONS Quick User’s Guide AXIS 241Q/241S User’s Manual Rev. 1.00 Part No.
