Instruction manual

AXIS 2411 Admin Manual Installation

Installation

• Quick installation - Follow the instructions below to quickly install on an Ethernet network.

• Macintosh users - Please refer to Notes for Macintosh Users, on page 19.

❸Using an appropriate method for your operating system, assign your product with a unique IP

address from a computer on your network, as follows:

❶Connect the video output of your camera(s) to the AXIS 2411 video

port(s) using standard 75 Ohm coaxial video cable, terminated with a

BNC-connector. If your camera is supplied with a standard phono-type

(RCA) connector, use a BNC-to-RCA converter.

Serial number same as

MAC/Ethernet number; e.g.

00408c100086 =

00-40-8c-10-00-86

❷Note the Serial number on the

underside of the unit. You need to

know this to set the IP address.

Windows only - Start a DOS window and type these commands:

Syntax:

arp -s <Server IP address> <Ethernet address> <my PC IP address>

ping -t <Server IP address>

Example:

arp -s 172.21.1.200 00-40-8c-10-00-86 172.21.1.193

ping -t 172.21.1.200

UNIX only

- Type this in your command line:

Syntax:

arp -s <IP address> <Ethernet address> temp

ping <IP address>

Example:

arp -s 172.21.1.200 00:40:8c:10:00:86 temp

ping 172.21.1.200

❹Connect an Ethernet cable to the AXIS 2411

and attach it to the network.

Network socket

RJ-45 connector