Instruction manual

Troubleshooting AXIS 2411 Admin Manual
24
Note:
Bad snapshot images. Display incorrectly
configured on your
workstation.
In Display Properties, configure your display to show at least 65000
colors, i.e. at least 16-bit.
Using only 16 or 256 colors on your display will produce dithering
artifacts in the image.
Incorrect exposure in images. Incorrect line termination. If the AXIS 2411 is to be connected in parallel with other
equipment, disable the input termination by turning the
corresponding DIP switch to the right-position (OFF). Inversely,
when not using other equipment, set the Termination dip-switch to
ON (Left= default setting).
If you still have a problem after reading this information, please contact your reseller or check the FAQ
on the Axis Website at www.axis.com
Symptoms Possible causes Remedial actions