Instruction manual

AXIS 2411 Admin Manual Other IP Setup Methods

Notes for Macintosh Users

When using the AXIS 2411 on a Macintosh, please observe the following points:

Using AXIS IP Installer

AXIS IP Installer is a program for Windosw 95, Windows 98 and Windows NT that is ideal for

setting the IP addresses for multiple Axis networking products. Allowing you to conveniently

access the home page of any Axis device connected to your network, this freely distributed

software is available for download from the Axis Website at www.axis.com

Installing AXIS IP Installer:

1. Download the latest version of AXIS IP Installer onto your desktop and run

Setup_IPInstaller.exe to start the installation.

2. The AXIS IP Installer setup dialog is displayed on the screen.

3. Follow the instructions as they appear. Click Finish to complete the installation.

• The AXIS 2411 has a default IP address of 192.168.0.90.

• Assign a temporary IP address to a Mac workstation in the same subnet (e.g. 192.168.0.90)

and then connect to the server.

• Run the Installation wizard and set the desired IP address for the server.

• Reset the correct IP address for the Macintosh workstation.

• Changing the IP address for a Macintosh does not require a reboot.

• Currently there are limitations in the ActiveX Support in Internet Explorer running on the

Macintosh. This results in problems when viewing live moving images. The recommended

solution for viewing images from the AXIS 2411 on the Macintosh is to use Netscape Navi-

gator.