Instruction manual
AXIS 2411 Admin Manual Using the Video Server
17
Using the Video Server
This section is intended specifically for system Users; that is, personnel responsible for using the
AXIS 2411 as part of an integrated surveillance system.
Important!
Accessing your Surveillance Image
The AXIS 2411 can be used with most operating systems; Windows, Linux, UNIX, Mac, and several
others. You can access the AXIS 2411 from Netscape 4.7 och 7.x Internet Explorer 5.x och 6.x and
above (see the note below).
Follow the instructions below to access your surveillance images:
4. Start your browser.
5. Enter the name or IP address of the AXIS 2411 into the Location/Address field (URL) of your
browser:
Example!
A video image is now displayed in your browser.
Note:
•Your system Administrator has installed the AXIS 2411 on your computer network, connected a video
camera to the unit, and tailored the user functions and general look and feel of the system to meet
your specific surveillance needs. Consequently, many of the functions and examples provided within
the section may differ from those displayed in your system.
• Any deficiencies or shortcomings in your application should be referred to the system administrator,
who has high-level privileges that are normally denied to ordinary users.
http://172.21.1.200/
To enable the updating of images in Microsoft Internet Explorer, you must set your browser to allow
ActiveX controls and perform a once-only installation of Axis' ActiveX component onto your worksta-
tion.