Instruction manual

Configuring the Video Server AXIS 2411 Admin Manual
10
Configuring the Video Server
After deciding on the application you wish to develop and having installed your AXIS
2411, the unit is now connected directly to a local area network.
This section describes how to configure the AXIS 2411 and is intended specifically for
product Administrators – who normally have high-level privileges denied to ordinary
users.
The AXIS 2411 is configured from a standard browser (Netscape 4.7 och 7.x Internet Explorer
5.x och 6.x and above), by using the Administration Tools.
Important!
The Administration Tools
The Web-based Administration tools are displayed in an intuitive graphical user interface
that allows simple point-and-click system configuration. How to access and use the tools is
explained in the following pages.
Tip!
To access the AXIS 2411 configuration pages, you must first set the IP address, as described in Installa-
tion, on page 7.
On-line help is available on every Admin page of the AXIS 2411Web interface.
This information is of particular relevance when configuring the unit and should be used as a first point
of reference for resolving any administration queries. The help system is stored internally in the unit.