User`s manual

38
AXIS 240Q - System Options
If IPv6 is enabled, your camera will receive an IP address according to the configuration in
the network router.
There are also options for setting up notificatio
n of changes in the IP address, and for
using the AXIS Internet Dynamic DNS Service. For more information on setting the IP
address, please see the online help.
Notes:
•DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via
DHCP may lead to the situation where the IP address changes and you lose contact. Configure
the options for notification of IP address change (under Services) to receive notification from
the video server when the IP address changes.
•Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 240Q by
host name which is always the same, regardless of the IP address.
Services
Enable ARP/Ping setting of IP address - The
IP address can be set using the ARP/Ping
method, which associates the unit's MAC address with an IP address. Check this box to
enable the service. Leave disabled to prevent unintentional resetting of the IP address.
Notes:
• The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address
is set.
• Pinging the unit will still be possible when this service is disabled.
AXIS Internet Dynamic DNS Service - If the AXIS 240Q has been registered with the Axis
Internet Dynamic DNS service and the IP address for the product changes, the service is
updated to reflect the change. Check the box to enable/disable automatic updates.
The domain name currently registered at the Axis Internet Dynamic DNS service for your
product can at any time be removed. To
do this click Settings... and follow the
instructions. For more information, please refer to the online help