User Guide

PHP3 Guide
Axis Communications AB does not provide support for application development of any kind. The
information here is provided "as is", and there is no guarantee that any of the examples shown
will work in your particular application.
Revision 0.91 June 2001 18
Go back to the ftp session and continue:
ftp> put inittab
200 Command okay.
150 Opening data connection.
226 Transfer complete.
ftp: 1414 bytes sent in 0,00Seconds 1414000,00Kbytes/sec.
250 Command successful.
ftp> by
221 Goodbye.
Restart the camera and it will be possible to access with Telnet.
Activate the script through telnet
To activate the script through telnet, follow the instructions below:
1. Open a telnet connection to the Video Server.
2. Type the Video Server IP-address as the Host Name:
Eg: 10.13.9.73
3. Then log in with the cameras user name and password
Eg: user name: root
Eg: password: pass
4. Type: cd etc/httpd/html
5. check that the file exists with the command ls
Eg: ls
6. Then activate the script by typing:
Eg: php <filename>