Instruction manual

Appendix C - Technical Specifications AXIS 2400 Administration Manual
44
Appendix C - Technical Specifications
System Requirements - The AXIS 2400 uses the standard Internet TCP/IP suite ofh protocols
and can be used with most operating systems: Windows 95, 98 and NT as well as Linux, UNIX,
Mac and several others. The only software required is an Internet browser, Netscape 4.x or
Internet Explorer* 4.x, or higher. *Requires AXIS Camera Control Software.
Installation - Physical network connection using RJ45 twisted pair cable. Installs directly to NTSC
or PAL video cameras using BNC connectors. Use as a standalone system or as an add-on to
existing CCTV systems.
Management - Remote configuration and status using Web-based tools.
Compression - Motion-JPEG, as well as single snapshot JPEG images. User controlled
compression level.
Video Features - Time stamp and text overlay. Color control (B/W or color).
Video Inputs - Four BNC composite video inputs with 75ohm/Hi Z termination. Autosensing for
NTSC and PAL.
Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP, NTP,
ARP, BOOTP.
General I/O - 4 optical-isolated alarm inputs and 1 output relay (max 24V, 0.1 A) supplied on a
single terminal block connector. Programmable inputs for remote image storage via File Transfer
Protocol (FTP) or E-mail (SMTP), pre/post alarm image storage.
Pre/Post Alarm Buffer - Up to 8 MByte memory available for pre/post alarm image storage.
Serial Connectors - 9 pin D-SUB RS-232 max 230 Kbps, 9 pin D-SUB RS-232 or RS-485/422
max 38.4 Kbps, half duplex
Pan/Tilt/Zoom - PTZ support for remote camera control. Currently supported units and
protocols include: Ernitech ICU 51PA, Sony EVI-G20/21, EVI-D30/31 and Canon VC-C3. Future
support for other PTZ units.
Security - User level password protection.
Operating Conditions: - Temp: 40-125×F (5-50×C), Humidity: 20-80% RHG.
Approvals - EMC: FCC Class A, CE:EN 55022/1987,EN50082- 1/1992
Safety: EN 60950, UL, CSA.