Instruction manual

AXIS 2400

Administration Manual Appendix A -

Troubleshooting

Note:

If you still have a problem after reading this information, you qualify for the “More than a minute

program” which entitles you to a free gift for a registered installation requiring more than a few

minutes. Please contact your reseller or check the FAQ should you require more assistance.

Symptoms Possible causes Remedial actions

Triggering difficulties with

programming scripts

Unable to triggering on

both positive and negative

transitions of the Control

Button and/or IO ports

(double-edged trigger-

ing).

Repetitive trigger conditions that occur in quick succession

of one another can be missed. This is because the com-

mand initiated by the first trigger event may not have been

fully executed prior to the second event. This scenario is

demonstrated in the illustration below:

This feature has particular significance when using com-

mands that take a relatively long time to process, e.g. mail

or ftp, especially if they are conjugated with a loop state-

ment. See also

Appendix H- The Programming Script

Bad snapshot images. Display configured incor-

rectly on your worksta-

tion.

Within Display Properties, configure your display to show at

least 65'000 colors, i.e. at least 16-bit.

Using only 16 or 256 colors on your computer will produce

dithering artifacts in the image.

Command

T2 T3

Command

Tr ig ge r

Time