Instruction manual

AXIS COMMUNICATIONS
<Product Name> Quick User’s Guide
AXIS 2400 Administration Manual
2
About This Document
This guide is applicable for AXIS 2400 Video Server software
releases 1.0.
The document is intended for anyone involved in installing and
using the product. It provides introductory information as well
as instructions on how to set up and manage the product.
Superceding and late change information for this document will
be posted to the Axis Website, as required.
Safety Notices
Please observe all safety markings and instructions when using
this product.
Caution!
Potential hazard that can damage the product.
Important!
Potential hazard that can seriously impair operation.
Do not proceed beyond any of the above notices until you have
fully understood the implications.
Legal Considerations
Camera surveillance can be prohibited by laws that vary from
country to country. Check out the laws in your local region
before using the AXIS 2400 for surveillance.
Electromagnetic Compatibility (EMC)
USA - This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance
with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart B
of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when operated in
a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the
user at his/her own expense will be required to take whatever
measures may be required to correct the interference. Shielded
cables should be used with this unit to ensure compliance with
the Class A limits.
Europe - This digital equipment fulfills the
requirements for radiated emission according to limit B of
EN55022/1994, and the requirements for immunity according
to EN50082-1/1992 residential, commercial, and light industry.
Liability
Every care has been taken in the preparation of this manual; if you
detect any inaccuracies or omissions, please inform your local Axis
office which can be found on the cover of this document. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Year 2000 Compliance
Axis Communications AB warrants that the AXIS 2400 is Year 2000
compliant.
Trademark Acknowledgments
Acrobat, Adobe, Ethernet, IBM, Internet Explorer, LAN Manager,
Macintosh, Microsoft, Netscape Navigator, OS/2, UNIX, Windows,
WWW are registered trademarks of the respective holders.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States
and other countries. Axis Communications AB is independent of Sun
Microsystems Inc.
Support Services
Should you require any technical assistance, please contact your local
dealer. If your questions cannot be answered immediately, your dealer
will forward your queries through the appropriate channels to ensure
you a rapid response.
If you are connected to Internet, you can obtain on-line manuals,
technical support, software updates, application software and general
corporate information from any of the locations listed below.
Axis’ CCTV Website http://www.cctv.axis.com/
WWW: http://www.axis.com
FTP: ftp://ftp.axis.com/pub/axis
AXIS 2400 Administration Manual
Revision 1.0
Part No: 16644
Dated: March 1999
Copyright © Axis Communications AB, 1996 -
1999