Instruction manual

AXIS 2400 Administration Manual Configuring the Video Server

Clicking the Finish button on the last page of the Wizard saves the new settings to the Video

Server.

Using the Detailed View

Clicking the Detailed View displays the Network Settings dialog which is navigated by clicking

any visible tag. From this dialog you can display, edit and refine the settings for any supported

network protocol.

Note:

Any changes that you make are only implemented when you click the OK button; consequently,

all of the protocols can be safely browsed and edited before deciding to save the settings.

With reference to the on-line help information and the table below, use the Detailed View to

manually configure the Network Settings:

TCP/IP Parameters Description

BOOTP Enable the BOOTP protocol for downloading the Internet address automatically. For further

information on using BOOTP see also

Using BOOTP in UNIX,

on page 16.

RARP Enable the RARP protocol for downloading the Internet address automatically to the unit. For

further information on using RARP, see also

Using RARP in UNIX,

on page 15.

IP Address Specifies the unique 32-bit IP address of your unit.

Default Router Defines the default router for the AXIS 2400 which by default, is set to automatic router

search.

Subnet Mask Defines the subnet mask for the AXIS 2400. Used for determining when the traffic should be

sent via a router. The default 0.0.0.0 indicates automatic router sensing.

DNS Parameters Description

Primary DNS Defines the IP address of the primary DNS server. Used for identifying computers with names

instead of IP addresses.

Secondary DNS The IP address of the secondary DNS server. The secondary DNS server will be used in case

the primary DNS server is unavailable or disconnected.

SMTP Parameters Description

SMTP Mail Server Defines the server that is to provide your e-mail facilities.

SMTP Return

Address

The reply address for e-mails sent by the AXIS 2400; that is, the name address that is to

appear in the ‘sent by’ field of the dispatched e-mail.

HTTP Parameters Description

URL to Page Defines a target Web page for displaying the connected video sources.

URL to Image Defines a target image for displaying the connected video sources.