Instruction manual

AXIS 2400 Administration Manual Configuring the Video Server

Specific Settings Description

Video Settings Enable/Disable the selected video source and specify which Pan Tilt driver (serial port)

each connected video camera is connected to - if any. Note: Two different icons are

displayed to differentiate video sources not connected to Pan Tilt devices (icon-left) from

those that are (icon-right). For each source specify:

• Image settings: set the image features; such as: displaying text, clock, color or B&W etc

• Video Input/Modulation: to define the video color standard automatically or manually.

• Preset Positions: visible only to Pan Tilt connected sources, for creating Pan Tilt and

Zoom preset conditions.

Configure Serial Port

For each of the two supported serial ports specify:

• Purpose: Pan Tilt, Generic or None

• Interface Mode/Serial mode: RS485 or RS232 (Port 1 only)

• Communication settings: Baud Rate (bps), Data Bits (length), Stop and Parity Bits

Pan Tilt Settings A Pan Tilt icon is displayed underneath a Serial Port icon only if the

purpose

of the

respective serial port is defined as Pan Tilt.

Select the Pan Tilt driver and define the driver specific settings: Canon VC-C3Sony

EVI-D30, Sony EVI-D31Sony EVI-G20, Sony, EVI-G21VideMechErnitec, ICU are all

supported.

Preset Settings A Preset icon is dappled next to a video icon only after the respective video source has

been connected to a pan tilt device, via the COM1 or COM 2 ports.

Click the Preset icon to create new camera positions and/or assume a previously

established preset position.

Generic Settings A Generic icon is displayed underneath a Serial Port icon only if the

purpose

of the

respective serial port is defined as Generic.

Configure the port as an HTTP input/output or TCP input/output and save the changes.