Instruction manual
AXIS 2400 Administration Manual Quick Installation Procedure
Quick Installation Procedure
To get your Video Server up and running on an Ethernet network, follow these instructions:
1. Note the serial number found on the underside label of the Video Server. The serial number
equals the Ethernet address of the unit.
2. Connect the video camera(s) to the Video Server.
3. Connect your Video Server to the network.
4. Connect the external power supply. Note: The power supply supplied with your product is
country specific. Refer to Checking the Hardware Inventory, on page 11 and check that the type
of power supply is correct.
5. Acquire a valid and unused IP address for the Video Server from your Network Administrator.
6. Assign the IP address using your preferred method, the AXIS IP Installer program or ARP:
Easy - AXIS IP Installer
7.aWindows 95/98 & NT - Install the AXIS
IP Installer. You will find the installation
program on the AXIS Online CD and on
the Axis Web Site at http://www.axis.com
7.bRun the AXIS IP Installer from the Start
menu.
7.cRestart your camera server.
7.dLocate the serial number of your Video
Server in the list.
7.eEnter the desired IP address, and click Set
IP address.
8. To access the Video Server Home Page,
click Home page of selected Axis-server...
Quick - ARP/ping
7. Windows 95/98 & NT - Start a DOS
window and type these commands:
Example
UNIX & OS/2 - Type these commands:
Example
8. To access the camera server Home Page,
start your Web browser and enter the IP
address in the location/address field:
Example
9. The installation is complete. Access the Web-based Admistration Tools and configure the Video
Server to suit your user requirements.
arp -s <Server IP address> <Ethernet address>
<my PC IP address>
ping <Server IP address>
arp -s 192.168.3.191 00-40-8c-10-00-86
192.168.3.193
ping 192.168.3.191
arp -s <IP address> <Ethernet address> temp
ping <IP address>
arp -s 192.168.3.191 00:40:8c:10:00:86 temp
ping 192.168.3.191
http://<IP address>/
http://192.168.3.191/