Instruction manual

Installation AXIS 2400 Administration Manual

Using BOOTP in UNIX

Follow these steps to use the BOOTP method:

1. Append the following entry to your boot table. This is typically done using the command

/etc/bootptab:

where:

Example:

2. If necessary, update your host table and alias name databases as described required by your system.

3. If it is not already running, start the BOOTP daemon. This is typically done using the command

bootpd.

4. Restart the AXIS 2400 to download the IP address, default router address, and subnet mask.

<host name>:ht=<hardware type>:vm=<vendor

magic>:\

:ha=<hardware address>:ip=<IP address>:\

:sm=<subnet mask>:gw=<gateway field>

ht = ether

vm = rfc1048

ha = The Ethernet address of the AXIS 2400

ip = The IP address of the AXIS 2400

sm = The subnet mask

gw = The default router address

camserv:ht=ether:vm=rfc1048:\

:ha=00408c100086:ip=192.168.3.191:\

:sm=255.255.255.0:gw=192.168.1.1