Instruction manual

AXIS 2400 Administration Manual Installation
11
Installation
Follow the instructions included in this section to install the AXIS 2400 into your networking
environment. Each phase of the documented installation procedure is summarized below:
• Checking the Hardware Inventory
• Connecting Your Cameras to the AXIS 2400
• Assigning an IP Address
• Verifying the Installation
Checking the Hardware Inventory
Unpack and check all the items against the check list below. Contact your dealer if anything is
missing or damaged. All packing material is recyclable.
Connecting Your Cameras to the AXIS 2400
The AXIS 2400 can accommodate up to four coax/BNC connected video sources that can be
displayed simultaneously in quad format or singularly; and although the number of video sources
connected to the server will impact the frequency of picture updates, the AXIS 2400 delivers up to
25 PAL and 30 NTSC frames/second over 10/100MB networks.
Important!
Refer to your camera supplier’s documentation for details on how to connect the cameras.
Hardware Model Variants Part Numbers
Video Server
AXIS 2400 0092- 001- 01
Power Supply
Europe 14233
UK 14234
Australia 14255
USA 14253
Japan 14254
Media
Title Part Numbers
CD-ROM
AXIS Online CD -
Printed Materials
This Administration Manual 16644
Due consideration to your available network bandwidth and the demands of your application should be
considered prior to connecting video sources to the AXIS 2400. Generally, your application is not able
to support simultaneous multi-client access to more than one single video source at frequencies greater
than 20 frames/second.