Technical data

12/2006 – Subject to change – Multi-Axis Controllers and ServoWire
®
Digital Drives
23
Drive Configuration Software
SEC-SDD ServoWire
®
Digital Drives
3
ServoWire Setup
ServoWire setup simplifies the process
of configuring SEC-SDD ServoWire
digital drives. This includes system
settings such as loop update rates, the
types of drives that make up the system
as well as initial parameter settings.
Setup Utility Features:
 Configure system parameters
such as loop update rate and drive
models.
 Add, remove, copy, and paste up to
16 drives onto the ServoWire network.
 Add motors to the ServoWire drives
by selecting from a user defined
library of custom motors.
 Configure each drive’s operating
voltage, local I/O and external
regen resistor (optional).
 Configure axis position, velocity
and acceleration units and establish
the maximum range limits.
 Configure axis response to drives’
high-speed discrete inputs
(rising-edge, falling-edge or level).
 Configure axis output for brake
control.
 Establish initial axis tuning
parameters for position, velocity
and current control loops.
ServoWire Pro Software
ServoWire Pro provides an integrated
suite of configuration, diagnostic and
maintenance utilities that assist in the
development and ongoing support
of SEC-SDD ServoWire digital drive
systems.
ServoWire Setup provides menus
and software wizards to simplify
the configuration of SEC-SDD
ServoWire digital drives.
ServoWire Upgrade provides tools
for upgrading the SEC-SDD drives to
latest firmware.
ServoWire Tune includes tuning
scope and software for optimizing
motion performance.
ServoWire Monitor provides
diagnostic utilities for monitoring
drive and network performance.
ServoWire Cam Profile Designer aids
users in creating cam and profile data.