User`s manual

AXIS 223M - System Options
33
Plain Config - this function is for the advanced user with previous experience of configuring Axis cameras. All
parameters can be set and modified from this page. Help is available via the links on the standard setup pages.
Resetting to the Factory Default Settings
To reset the camera to the original factory default settings, go to the System Options > Maintenance web page
(as described in
Maintenance, on page 32) or use the Reset button on the rear of the camera (see the illustration
on page 6) as described below:
Using the Reset Button
To reset the camera to the factory default settings using the Reset Button:
1. Disconnect the power adapter, or the network cable if using PoE.
2. Press and hold the Reset button while reconnecting power.
3. Keep the Reset button pressed until the Status Indicator color changes to amber (which may take up to
15 seconds).
4. Release the Reset button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the process is complete
and the camera has been reset. The unit will now have the default IP address 192.168.0.90