User`s manual

AXIS 223M - Video and Image Settings
14
Video and Image Settings
The following descriptions show examples
of some of the features available in the
AXIS 223M. For details of each setting,
please refer to the online help available
from the setup tools. Click
to access
the online help.
Image Appearance
Use these settings to change the image as
required. The video image can be rotated
and fine-tuned by adjusting the color
level, the brightness and the sharpness.
The configuration of the video image will
affect the camera’s overall performance,
depending on how it is used and on the
available bandwidth. Setting higher
resolution and lower compression
improves video image quality, but
increases the amount of bandwidth used.
When the box for Widescreen resolutions
(16:9) is checked, all the currently open
video streams are stopped and the
resolutions for this format are displayed
in the drop-down list. Open video streams are also stopped when this box is unchecked and the format switches
to 4:3. Please see the online help for further information on these settings.
Video Stream
Define the maximum video stream time per session in seconds, minutes or hours. When the set time has
expired, a new stream can be started by refreshing the page in the Web browser. For unlimited video stream
time, set this value to 0. This setting is only applicable to Motion JPEG.
The frame rate allowed to each viewer can also be limited, to avoid bandwidth problems on the network.
Test
To preview the image before saving, click Test. Note that the preview image will be in JPEG format, even though
the settings are valid both for Motion JPEG and MPEG-4.