User`s manual

41
AXIS 223M - System Options
Network
Basic TCP/IP Settings
Network Settings - Click the View button to see the current network settings.
IP Address Configuration - The AXIS 223M supports both IP version 4 and
IP version 6.
Both versions may be enabled simultaneously, and at least one version must always be
enabled.
When using IPv4, the IP address can be set automatica
lly via DHCP, or a static IP address
can be set manually.
If IPv6 is enabled, your camera re
ceives an IP address according to the configuration in the
network router.
There are also options for setting up notification of changes in the IP
address, and for
using the AXIS Internet Dynamic DNS Service. For more information on setting the IP
address, please see the online help .
Notes:
• To receive notification whenever the camera’s IP address changes (via e.g. DHCP),
configure the options for notification of IP address change. See Services below.
• If your DHCP server can update a DNS server, you can access the AXIS 223M by a host
name which is always the same, regardless of the IP address.
Services
Enable ARP/Ping setting of IP address - The
IP address can be set using the ARP/Ping
method, which associates the unit's MAC address with an IP address. Uncheck this option
to disable the service in order to prevent unintentional resetting of the IP address. For more
information see Other methods of setting the IP address in the AXIS 223M Installation
Guide.
Notes:
• The ARP/Ping service is automatically disabled two minutes after the unit is started, or
as soon as an IP address is set.
• Pinging the unit will still be possible when this service is disabled.
Options for notification of IP address change - DHCP is a protocol for automatic IP address
assignment on a network. IP address assignment via DHCP may lead to the situation where
the IP address changes and you lose contact with the camera. Configure the options for
notification of IP address change (under Services) to receive notification from the camera
when the IP address changes.
AXIS Internet Dynamic DNS Service - The AXIS Internet Dynamic DNS Service can
provide
your Axis product with its own URL (web address), which can then be used to
access it over the Internet. The product can be unregistered from the service at any time. To
do this click Settings... and follow the instructions. For more information, please refer to
the online help .