User`s manual

36
AXIS 223M - Event Configuration
Motion Detection
Motion detection is used to generate an alarm whenever movement either occurs or stops
in the video image. A total of 10 windows (Include or Exclude) can be configured.
• Included w
indows target specific areas within the whole video image
• Ex
cluded windows define areas within an Include window that should be ignored
(areas outside Include windows are automatically ignored)
Once configured, the motion detection windows appear in the list of available triggers, for
tr
iggering events. See How to set up a triggered event above.
Note:
Using the motion detection feature may decrease the camera’s overall performance.
Configuring Motion Detection
1. Click Motion Detection in the Event Config menu.
2. Click Add Window, and select if you want to add an Include or an Exclude
window by checking the relevant box.
3. Enter a descriptive name for the window.
4. Adjust the size (drag the bottom right-hand corner) and position (click on the text
at the top and drag to the desired position).
5. Adjust the Object size, History and Sensitivity profile sliders (see table below for
details). Any detected motion within an active window is then indicated by red
peaks in the Activity window (the active window has a red frame).
6. Click Save.
To exclude parts of the Include window, click the Configure Excluded Windows button
and position the Exclude window as required, within the Include window.