User`s manual

11
AXIS 223M - Accessing the Camera
The Live View page
Not all the buttons described below will be visible unless the Live View page has been
customized to display them.
The Vi
deo format drop-down list allows the video format on the Live
View page to be temporarily changed.
The Output buttons, Pu
lse and Active/Inactive below, control the output directly from
the Live View page. These buttons are configured under Setup > Live View Config >
Layout.
Pulse -
click this button to activate the output for a defined period of time,
such as switching on a light for 20 seconds.
Active/Inactive - click these buttons to
manually start and stop a connected
device, such as switching a light on/off.
These buttons start and stop the Seque
nce Mode. This mode is created in
Setup > Live View Config > Sequence mode, and automatically
displays the
view from two or more video sources at set intervals.
From the Source list, select the desired external video source. Note that
Sequence Mode must be stopped before selecting
a source from this list.
The Trigger buttons can trigger
an event directly from the Live View page.
These are configured under Setup > Live View Config > Layout.
The Snapshot
button saves a snapshot of the image currently displayed.
Right-click on the video image to save it in JPEG format
on your computer.
This button is intended for use when the AMC viewer toolbar is not available.
If you have Vi
deo format set to Motion JPEG, you can use the View size
buttons to either reduce the image to 800
pixels in width or return the image
to full scale. To view the View size buttons, Setup > Video & Image >
Resolution must also be set to greater than 800 x 600 pixels.
The AMC (AXIS Media Control) viewer toolbar is avai
lable in Microsoft Internet
Explorer only. It displays the following buttons:
Play/Stop
buttons - start and stop the live video stream.
The Snapshot
button saves a snapshot of the video image currently displayed.
The Snapshot function and the target directory for saving
snapshots can be
configured from the AMC Control Applet in the Windows Control Panel
(Internet Explorer only).