User`s manual

AXIS 213 - Connection Module

Connection Module

The connection module is an optional accessory that connects to the camera and

provides the following connections:

• SERVER - for the connection to the AXIS 213 • AUDIO IN/OUT

• 2 Digital inputs • 3 Relay outputs

• VIDEO IN • VIDEO OUT

• RS-232C serial port

The connection module is configured and controlled via the camera’s user interface.

Notes: • Use an electret microphone. The microphone will be powered by the module through a 9.4k

• Use amplified speakers only, stero or mono plug

AUDIO IN/OUT

1. Connect a microphone (not supplied) to the AUDIO IN socket.

2. Connect a loudspeaker (not supplied) to the AUDIO OUT socket (amplified

speakers only).

Inputs and outputs (I/Os)

The I/Os are used in applications for, e.g. event triggering, time lapse recording, alarm

notification via email, image storage to FTP locations.

• Input - e.g. a pushbutton. If the button is pressed, the state changes, and the

input will be active (shown under Event Configuration > Port Status).

• Output - e.g. an alarm device that can be activated from Output buttons on

the Live View page, or as an action for an Event Type. If the alarm device is

activated, the output will show as active (under Event Configuration > Port

Status)

Connect to GND to activate or leave floating (unconnected) to deactivate.

Active output, electrical connection between A and B. Non active output, no connection

between A and B.

Imax=100mA, VMax=24V

I/O Description

Alarm In 1,2

Alarm GND

Alarm Out

1A,1B;2A,2B;3A,3B

Ω