User`s manual

AXIS 213 PTZ

Event Configuration

This section describes how to configure the AXIS 213 PTZ for alarm and event handling. The AXIS 213 PTZ

can be configured to perform certain actions when certain types of events occur.

Terminology

• Event Type - a set of parameters describing the network camera. An event type may result in a

single event, or in many, depending on how often the conditions governing its behavior apply.

• Triggered Event Type - an event that

is activated by a specific internal or external trigger condi-

tion. For example by motion detection or by an external

device such as a door switch or a sensor.

• Sche

duled Event Type - an event that runs at a pre-programmed time.

• Ac

tion - what occurs when the event triggers an action, such as the upload of video images to an

FTP server, email notification, and so on.

Event Servers

Event Servers are used, for receiving uploaded image files and/or notification messages for example. To set

up Event server connections in your AXIS 213 PTZ, go to Setup > Event Configuration > Event Servers

and enter the required information according to the selected server type.

For details on each setting, please

refer to the online help files available from each web page.

Note:

Pre-trigger and Post-trigger buffers are lost if the connection to the event server fails.

When the setup is complete, the connection can be tested by clicking the Test button (the connection test

takes approximately 10 seconds).

Server type Purpose Required information

FTP server • Upload of saved images • IP address/hostname

• Descriptive name of your choice

• User name and password (to FTP server)

• Upload path

• Port number

• Use passive mode if there is a firewall between the camera and the FTP server

HTTP server • Notification messages

• Upload of saved images

• Descriptive name of your choice

•URL

• User name and password (to HTTP server)

• Proxy address/proxy port

• Proxy user name and password

TCP server

Notification messages

• IP address/hostname

• Descriptive name of your choice

• Port number