User`s manual

15
AXIS 210/211/211A - Configuration
Event Configuration (Administrator/Operator)
System Options (Administrators only)
Tools Settings / Options / Description
Instructions General Instructions
Event Servers Specify destinations for uploaded image files and/or notification messages sent by the camera. FTP servers and
HTTP servers can save image files. HTTP servers and TCP servers can receive notification messages.
Event Types Set up event types so that the camera will perform various actions, e.g. upload images to a specified destina-
tion. These event types can be Triggered - e.g. they run when an alarm is activated, or Scheduled - the event
type runs at a set time.
Motion Detection Set up areas in the video image where an alarm is activated whenever movement occurs there. Each motion
detection window can be moved, re-sized, or disabled at any time. The behavior for each window is defined by
adjusting the Object size, History, and Sensitivity profile sliders. Exclude windows can be used to mask areas
where motion should not activate alarms.
Port Status Shows the status for the camera's input and output - see Ports & Devices under System Options.
Tools Settings / Options / Description
Security Users Access to the camera can be restricted to defined users only (maximum 20). An admin-
istrator has unrestricted access to the Setup tools and can determine rights for users
at 3 levels; Administrator, Operator or Viewer.
IP Address Filter Once enabled, only the IP addresses shown in the list of allowed addresses will be per-
mitted to access the camera. All others will be blocked.
Date & Time Define the date and time settings for your camera, manually or automatically.
Network TCP/IP Specify IP address configuration, DNS configuration, Host Name configuration, Notifi-
cation of changes to the IP address. Register/unregister for the AXIS Internet Dynamic
DNS Service. Specify the HTTP port and network traffic preferences.
SOCKS Specify a SOCKS server to use when communicating with hosts on the other side of a
firewall/proxy server.
SMTP Specify the host names or addresses for your primary and secondary mail servers in the
fields provided to allow the camera to send event and error email messages to pre
-
defined email addresses.
UPnP The camera includes support for UPnP. Enable UPnP and enter a user-friendly name for
the camera. Note that UPnP is enabled by default.
RTP (multicast) Enable/disable multicast and specify multicast addresses. Only applicable when
MPEG-4 is used as the video format.
Ports and Devices I/O Ports Configure the camera's input and output. Enter descriptive names and specify the
ports’ Normal states (Open circuit or Grounded circuit).
LED settings The Status LED can be made to flash whenever the camera is accessed.
Maintenance Functions for restarting the camera, restoring settings, upgrading the camera, backing
up and restoring configurations.
Support Support Overview Links to the Troubleshooting guide, the Server report (always include this when
requesting support) and the Axis Support Service.
Logs & Reports Generate Logs (all log information is shown in one file), reports (information about the
camera’s status) and a parameter list.
Advanced Scripting This powerful function allows users to customize and use their own scripts, for creat-
ing specialized applications.
Plain Config Plain config allows direct access to all the configurable parameters.