User`s manual

14
AXIS 210/211/211A - Configuration
Overview of the Setup tools
Basic Configuration
The links under Basic Configuration are shortcuts providing a convenient way of making
the basic settings the first time the unit is configured.
Video & Image (Administrator/Operator)
Audio (Administrator/Operator)
Live View Config (Administrator/Operator)
Tools Description
Instructions General Instructions
Users See System Options > Security > Users below
TCP/IP See System Options > Network > TCP/IP below
Date & Time See System Options > Date & Time below
Video & Image See Video & Image below
Focus (AXIS 211/211A only) For help, see the Focus adjustment page in the Setup tools, or see page 10 of this manual.
Audio (AXIS 211A only) See Audio below
Tools Settings Description
Video & Image Image Appearance Basic video image settings - resolution, compression, image rotation, color, brightness
and contrast.
Overlay Settings Specify text overlays and/or position an image overlay (e.g. a logo) in the video image.
Video Stream Used to limit the video stream display time and frame rate.
Overlay Image Specifies the overlay image to use in the Overlay settings (see above). This is also the
page to use for uploading and removing images.
Advanced Camera Lighting Conditions - adjust the white balance and exposure control settings.
Low light Behavior - give priority to the frame rate or the video image quality in low
light conditions.
MPEG-4 Settings for profile@level, GOV structure and length. Note that changing these set-
tings may affect the amount of bandwidth required for the video stream.
Tools Settings Description
Audio Settings General Turn audio on or off.
Audio Channels Set the audio configuration, i.e. who will transmit and/or receive audio.
Microphone Configure the internal microphone in the AXIS 211A or an external microphone or
other audio source attached to the camera.
Speaker Set the volume for any speakers connected to the AXIS 211A.
Advanced Audio Quality Settings Manipulate the sound signal to improve the quality of the sound from the AXIS 211A.
These settings may improve sound quality when the camera is placed in certain envi
-
ronments, e.g. a noisy factory.
Tools Description
Layout Customize the Live View page, by adding e.g. custom links, manual trigger buttons and manual output control
buttons. Default Viewer: set your preferred method of viewing moving video images.
HTML Examples Add live video from your camera Network Camera to your own web site, or to an HTML page on your local hard
disk.
External Video Display live video from an external source, i.e. from another Axis device on the network.
Sequence Mode Configure the camera to automatically display the available video sources at regular intervals. The video
images can be displayed in order or randomly. The time interval can be set to up to 59 minutes.