User`s manual

12
AXIS 210/211/211A - Accessing the Camera
AMC audio controls for AXIS 211A
There are some audio controls for controlling the client computer’s speaker output and
microphone sensitivity. These controls are only available when audio is enabled, see
Audio Settings, on page 22. Push-to-talk settings are made in the AMC control panel, see
AXIS Media Control, on page 20.
The AMC viewer toolbar (AXIS Media Control) is available in Microsoft Internet
Explorer only. It displays the following buttons:
The Play/Stop button starts and stops the live video stream.
The Snapshot button saves a snapshot of the video image currently being
displayed. The Snapshot function and the target directory for saving snapshots
can be configured from the AMC Control Applet in the Windows Control Panel
(Internet Explorer only).
Click the View Full Screen button to make the video image fill the entire screen
area. No other windows will be visible. Press Esc (Escape) on the computer
keyboard to exit full screen.
Click the Speaker and Microphone buttons to switch the sound off and on for
the speaker and microphone, respectively.
Use the sliders to control the volume on the speaker and
microphone. The volume settings can be between 0 and 100. The
Buffer slider controls the size of the buffer for audio. A higher
level will reduce audio break-up, but may introduce a noticeable
lag in audio transmission. There are four settings i.e. min, low, high and max.
When using Half-duplex mode this button toggles between allowing you to
speak or listen. The first icon indicates that you can talk and the speaker
attached to the camera will play your voice. The second indicates that you will
hear audio from the camera, but no audio will be sent to any web clients.
When in Simplex - AXIS 211A speaker only mode, click the button to speak. The
button is dimmed when you do not want other clients to receive any audio.