Installation guide
Switch
33V
Mode
+
Power
=~
Supply
=;=:
PS-K 9W
2
e,g"
doorbell
GND 1
3
,
This will reset all parameters, including the
IP
address, to the factory default settings:
Page
17
The user's manual is available from the Axis Web site at www.axis.com
or
from the Axis
Network Video Product
CD
supplied with this product.
Further information
AXIS
21O!210A!211!211A Installation
Guide
Resetting to the Factory Default Settings
1.
Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3.
Keep
the Control button pressed until the Power indicator flashes amber (this may take
up to
15
seconds).
4.
Release the Control button. When the Power indicator displays green (which can take up
to 1 minute) the process is complete and the camera has been reset.
5.
Re-assign the
IP
address, using one
of
the methods described in this document.
It
is also possible to reset parameters to the original factory default settings via the web
interface. For more information, please see the online help or the user's manual.
-
,
,
,
,
,
;:"
,
,
,
,
L
__
AXIS
210!210A!211!21
'IA
Installation
Guide
Page
16
Connection diagram
4
Tip!
Visit www.axis.com/techsup to check
if
there is updated firmware available for
your
AXIS 21O/21OA/211/211A.
To
see the currently installed firmware version, see the
Basic Configuration web page in the product's Setup tools.
LED
indicators
LED
Color
Indication
Network
Green
Steady
for
connection to a
100
Mbit/s
network,
Flashes
for
network activity.
Amber
Steady
for
connection
to
10
Mbit/s
network,
Flashes
for
network
activity.
Unlit
No
network connection,
Status
Green
Steady green
for
normal
operation.
Note:
The
Status
LED
can
be
configured
to
be
unlit
during
normal
operation,
or
to
flash
only
when
the
camera
is
accessed.
To
configure,
go
to
Setup>
System
Options
>
LED
settings.
See
the
online
help
files
for
more
information.
Amber
Steady
during
startup,
during
reset to factory default
or
when
restoring
settings.
Red
Slow
flash
for
failed
upgrade.
Power
Green
Normal
operation.
Amber
Flashes
green/amber
during
firmware upgrade.