Installation guide
Page
10
AXIS
210!210A!211!211A Installation
Guide
(
AXIS
210!210A!211!211A Installation
Guide
-----------~---_._---
Page
11
)
Zoom
puller
(Tele/wide)
Focus
pu
Iler
-----;===:I~=-_~
Focus
puller
Adjust the image and focus
Accessing the
AX1S
210/21
OA/211
/211
A from the lnternet
Once installed, your AXIS 21O/21OA/2ll/2IIA
is
accessible on your local network (LAN).
To
access the camera from the Internet, network routers must be configured to allow incoming
traffic, which is usually done on a specific port. Please refer to the documentation for your
router for filliher instmctions. For more information on this and other topics, visit the Axis
Support Web at www.axis.com/techsup
1.
From the Basic Configura-
tion
page in the setup
tools, open the Focus
adjustment
page.
2.
Set the DC-Iris to Disabled
and
click Save.
3.
Unscrew the zoom puller
on the lens
by
turning it
anti-clockwise. Adjust the
zoom setting
as
required.
Re-tighten the zoom puller.
4.
Unscrew the focus puller on the lens. Adjust the focus
as
required. Re-tighten the focus
puller.
5.
From the Focus adjustment page, set the DC-Iris to Enabled and click Save.
Note: The DC-Iris should always be disabled while focusing the camera. This opens the
iris to its maximum, which gives the smallest depth
of
field and thus the best
conditions for correct focusing. When the focus is set with this method it will
then be maintained in
any
light conditions.
To
focus the
AXIS
211/211A
follow the instmctions below.
To
focus the
AXIS
21O/21OA,
unscrew the focus puller on
the
lens. Adjust the focus
as
required. Re-tighten the focus
puller.
Th~
pH'''Q,d
fe'
\h~
pre"o,-,'Igured
.,dmir,i,tr.to,
root
m~"t
be
,h.nged
b~lc,~
th~
pro<!llct
,'"
b"-
l1Hd
~,1<!S:~.,
Configure
Root
Password
Setup
-
Provides
all
the
tools for configuring
the
camera
to
requirements,
\
AXIS
211
Netvv'ork
Camera
Live
View
I Setup I Help
~H"P
-
D;,pl,~
online
help
on
all
aspects
of
using
the
camera.
1.
Enter a password and then re-enter it, to
confirm the spelling. Click
OK.
2.
Enter the user name root in
the
dialog.
Note: The default administrator user name
,root cannot be deleted.
3.
Enter the password
as
set above, and click
OK.
Ifthe
password is lost, the
AXIS
210/
21OA/2ll/2llA must be reset to the factory default settings. See page
17.
4.
If
required, click
Yes
to install
AMC
(AxIS Media Control), which allows viewing
of
the
video stream in Internet Explorer. You will need administrator rights on
the
computer to
do
this.The Live View page
of
the
AXIS
21O/21OA/2ll/2llA is displayed, with links to the
Setup tools, which allow
you
to customize the camera.
Set the password
When accessing the AXIS 21O/21OA/2ll/21IA
for the first time, the 'Configure Root
Password' dialog will be displayed.