Installation guide
Page
9 )
Automatic discovery
1.
Check
that
the camera
is
connected to the network and that power has been applied.
2.
Start
AXIS
Camera Management. When the
AXIS
21O/21OA/211/211A
appears in
the
window, double-click it to open the camera's home page.
3.
See page
10
for instructions on how to set the password.
Set
the
lP address in multiple devices
AXIS Camera Management speeds up the process
of
assigning
IP
addresses to multiple
devices,
by
suggesting
IP
addresses from a specified range.
1.
Select the devices you wish to configure (different models can be selected) and click the
Assign
IP
button.
2.
Select Obtain IP addresses automatically
(DHCP),
click the Update button and the
program will search in the specified range
and
suggestan
IP
address for each device.
-or-
Enter the range
of
IF
addresses, the subnet mask and default router
that
devices can use
and
click the Update button.
AX1S
Camera
Management
-
multiple
cameras/large
installations
AXIS Camera Management can automatically find
and
set
IP
addresses, show connection
status, and manage firmware upgrades for multiple Axis video products.
(AXIS
21O/210A/2'11/211A Installation
Guide
AXIS
210j210A/211/211A
Installation
Guide
lPAddte-S5
192,168.0.90
fe-80:0:0:0:240:Bcff:feI8:298,~
AXI5211A-00408C718B17
A:,J5216FD-0040,SC18298A
Assign
the
lP address manually
1.
Acquire
an
unused
IF
address on the same network segment as
your
computer.
2.
Click the button
~
Assign
new
IP
address
using
serial
number
and
enter the serial
number and
IP
address for the AXIS
21O/21OA/211/211A.
The serial number is located
on
the product label.
3. Click the Assign button and follow the instructions.
4. Click the Home Page button to access the camera's web pages.
5. See page
10
for instructions on how to set the password.
AX1S
lP
Utility - single camera/small installation
AXIS
IP
Utility automatically discovers and displays Axis devices on
your
network. The
application can also be used to manually assign a static
IF
address.
Note
that
the computer running AXIS
IP
Utility must be on the same network segment
(physical subnet)
as
the
AXIS
21O/21OA/211/211A.
Automatic discovery
1.
Check
that
the AXIS
21O/21OA/211/211A
is connected to the network and
that
power has
been applied.
2.
Start
AXIS
IP
Utility.
3.
When the camera appears in the window, double-click it to open its home page.
4. See page
10
for instructions on how to assign the password.