User`s manual
38
AXIS 210/211 - System Options
Configuration
Log Level for Log Files - from the drop-down list, select the level of information to be
added to the Log file
Log Level for Email - from the drop-down list, select the level of information to send as
email and enter the destination email address.
Resetting to the Factory Default Settings
To reset the AXIS 210/211 to the original factory default settings, go to the System
Options > Maintenance web page (as described in Maintenance, on page 37) or use the
Control button on the underside of the camera (see the illustration on page 7) as described
below:
Using the Control Button
To reset the AXIS 210/211 to the factory default settings using the Control Button:
1. Disconnect the power adapter, or the network cable if using PoE (AXIS 211 only).
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the Status Indicator displays amber (this
may take up to 15 seconds).
4. Release the Control button.
5. When the Status Indicator changes to Green (which may take up to 1 minute), the
process is complete and the AXIS 210/211 has been reset. The unit will now have
the default IP address 192.168.0.90
Advanced
Scripting is an advanced function that provides the means for customizing and using
scripts.
Caution!
The scripting function is a very powerful tool. Improper use may cause unexpected
behavior or even loss of contact with the unit. If a script does cause problems, reset the
unit to its factory default settings (in which case, a previously saved backup file will be
useful for returning the unit to its latest configuration.) Axis strongly recommends that
you do not use this function unless you fully understand the consequences. Axis
support provide no assistance for customized scripts.
For more information, please visit the Developer pages at www.axis.com/developer
Plain Config - this function is for the advanced user with previous experience of
configuring Axis cameras. All parameters can be set and modified from this page. Help is
available via the links on the standard setup pages.