User`s manual

19
AXIS 210/211 - Configuration
Overview of the Setup tools
Basic Configuration
The links under Basic Configuration are shortcuts providing a convenient way of making
the basic settings the first time the unit is configured.
Video & Image (Administrator/Operator)
Live View Config (Administrator/Operator)
Event Configuration (Administrator/Operator)
Tools Description
Instructions General Instructions
Users See System Options > Security > Users below
TCP/IP See System Options > Network > TCP/IP below.
Date & Time See System Options > Date & Time below
Video & Image See Video & Image below
Focus (AXIS 211 only) For help, see the Focus adjustment page in the Setup tools, or see page 15 of this manual.
Tools Settings Description
Video & Image Image Appearance Basic image settings - resolution, compression, image rotation, color, brightness and
contrast.
Overlay Settings Specify text overlays and/or position an image overlay (e.g. a logo) in the video image.
Video Stream Used to limit the video stream display time and frame rate.
Advanced Lighting Conditions White balance and exposure control settings.
Low light Behavior Gives priority to the frame rate or the image quality in low light conditions.
Overlay Image Specifies the overlay image to use in the Overlay settings (see above.) This is also the page to use for uploading
and removing images.
Tools Description
Layout Customize the Live View page, by adding custom links, manual trigger buttons and manual output control but-
tons. Default Viewer: set your preferred method of viewing moving images.
HTML Examples Add live video from your AXIS 210/211 Network Camera to your own web site, or to an HTML page on your
local hard disk.
External Video Display live video from an external source, i.e. from another Axis device on the network.
Sequence Mode Configure the camera to automatically display the available video sources at regular intervals. The images can
be displayed in order or randomly. The time interval can be set to up to 59 minutes.
Tools Settings / Options / Description
Instructions General Instructions
Event Servers Specify destinations for uploaded image files and/or notification messages sent by the camera. FTP servers and
HTTP servers can save image files. HTTP servers and TCP servers can receive notification messages.
Event Types Set up event types so that the AXIS 210/211 will perform various actions, e.g. upload images to a specified
destination. These event types can be Triggered - e.g. they run when an alarm is activated, or Scheduled - the
event type runs at a set time.
Motion Detection Set up areas in the image where an alarm is activated whenever movement occurs there. Each motion detec-
tion window can be moved, re-sized, or disabled at any time. The behavior for each window is defined by
adjusting the Object size, History, and Sensitivity profile sliders. Exclude windows can be used to mask areas
where motion should not activate alarms.
Port Status Shows the status for the camera's input and output - see Ports & Devices under System Options.